MDS2106

UP

With neutral back cut $25.00 shipped...

http://www.bansheehq.com/forums/index.php?showtopic=102427

Or I will trade for a 4X4 and i can kick in some extra cash....

http://lakecharles.craigslist.org/mcy/882527415.html

I have had port work from both RB racing and also from Flotek.Both guys did top notch work and were very helpful with tuning and setup... Mark

I run the angled K&Ns, seems to work well.

These are the ones I run, with no complaints yet..... http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=280195078058

I run 34mm pjs and love them.Big improvement over the stockers and the 30mm oko's that i was running.It took me a little fine tuning to get the idle right, but once I got that down it was cake.

Here are some pics of a set that I sold to Bigboybanshee.This combo is way better than stock but the throttle is not as crisp as with v force reeds.Also the V-force put alittle more horse power on the dyno than the ported stockers.I did not get a chance to dyno the ported cages VRS. the stockers.To do the cages correctly it takes a little time.. http://www.bansheehq.com/forums/index.php?...89&hl=REEDS Mark

EXACTLY.....

All of his stuff hauls ass.He has produced some of the fastest blasters on the planet.Word is that at the next Clash of the Titans one of blasters that he bulit will break into the 3's . With the crafstmanship he puts into the little bikes,I figure his shees would produce as well...

The paddlebrats dominate over skat- trak

Pull the dipstick when draining the trans fluid = no noise

That blue soapy blue shit that is imbedded in a sos pad will actually shine the chrome up rather nicely and also leave a coating, makes the water bead and run off kinda like wax... Mark

It would be fun for crusing or duning and like Loco said play racing, but it would not fair well at drag racing against heavily modded drag banshees.We have a tl 1000 motor on nos, on a chrome moly drag frame and still have trouble with the heavily built drag banshees.The motors are soooo heavy.Currently we are putting a streetbike motor in a blaster frame it shoud make a fun play bike...

Your 96 has a 4 on 115 bolt patern and the 89 has a 4 on 156 bolt pattern.Count your blessings cause sand geckos are horribe sand tires and not worth 50 cents.....

Sos pad works great and will not scratch the chrome

I am picking up a set of drag pipes for my son's banshee in two weeks.I will have the T-5s for sale that is on his bike now.I will take $300.00 plus shipping.

When you order new pistons,they should come with new wrist pins and clips....

The stock size pod filters will work, you just need to boil some water and stick the clamp end in the water for a min. or two then push them on the carbs and let them cool.They will form fit to the carbs.We boiled and stretched a stock intake to fit on a 36mm carb this week on my buddies drag blaster...

Extremes paddles are the same height but thicker than regular hauler paddles.

I don't think they make a 1/2 link for a o-ring style chain...

port job.....

Its best to get new boots,but you can boil the stockers and force them on the pj's when the cool they are stretched to fit the carb..