MDS2106

Hard to beat this price....... http://www.vitosperformance.com/atv_parts/...=176&page=1

Its easy to make the stock fuel valve into a duel flow,you can even make it a tripple flow if you needed to.All you need is a drill,tap and a brass nipple.

I think your main is too big.I run 152 mains,55 pilots and I am dune ported with K&N clamp ons at sea level, all jetting was on a dyno.By the way these 30mm carbs like bigger pilots than most of the bigger carbs.When we first hooked it up to the sniffer i had 48 pillots in it and it waaaaayyyy lean on the bottom.It looks like i will probabaly end up changing the needles also.

Kaos,yall ever go ride at Holly Beach?

Thanks

Need a set of 300 and a set of 310 mains.

Pro wedge II or 4 Snows is hard to beat on dirt....

pm sent

I bought these from another member last month and they are not big enough so I am selling them, since i have bought these carbs I also purchased a couple of sets of mains and pilots a new throttle cable and a set of K&N pods.I will sell all for $200.00 shipped.The carbs are like new. here are some pics http://www.bansheehq.com/forums/index.php?...mp;#entry659265

PM sent

You do pass thru Sulphur to go to the dunes.Next time yall head down there shoot me a P.M. and I'll try to go.We get to the dunes a few times a year...

Welcome to the H.Q. - I'm from Sulphur Louisiana just a hop and a skip down the road...

No shit, I have been rigging up a throttle extender so I can ride tomorrow.I'll have to just putt around but at least i can ride...

Gave me 30 oxycodone and 25 hydrocodone

I hope that fuckin loser gets what he deserves.................

The clutch actuator/arm should pop right out.Are you sure the rod is not welded to the clutch arm?

When I changed the one on my son's banshee,I shoved a piece of a towel down the hole and cut the needle bearing using a dremmel, popped it out with a screwdriver then i used a little magnet to fish any metal shaving that fell on the rag.After installing the new one I ran it around for a little while and changed the trans. fluid.......

Premix ---- Mobil 1-2t Trans------- Valvoline atv oil

Its hard to tell because of the color of the area around it.That part of the finger was actually cut off and just hanging on by a little skin.The surgeon put a pin thru the top of my finger that hopefully will help the bone heal.I had it wrapped up in a towel when i arrived at the emergency room and as the nurse peeled the towel back I noticed that the severed tip of my finger was pointing back towards the nuckles,I freaked and said oh shit its cut off.I grabbed the towel and tightly wrapped it back up and told her i would need a shot before we go any farther.Everthing was pretty cool until i saw the finger all fucked up.

I have a deck washing nozzle installed on the mowedeck so after cutting i just hook up a hose and run the blades and the water cleans the underside of the mower deck.Well earlier that day i sharpened the blades and noticed the deck had a little build up of old grass, after cutting the grass i did the normal deck washing.I flipped the lever to disengage the blades and walked over to turn the waterhose off as I returned to the mower I noticed the belt slowing to a stop, so when the belt completly stopped I reached up under the deck to check for grass clippings.Well guess what the belt stopped but the blades were still free spinning.I was in a rush to pick up the kids at school and wasn't thinking when i did it.I was just tring to hurry and rush ,see what that shit got me.Anyways I ended having to drive myself to the emergency room,passing right by my kids at school on the way,but i couldn't stop.I was fuckin passing out driving to the hospital.Dr. said I won't be able to feel shit in my finger tip but I am lucky that it has blood flow and I should be able to keep it....

Boy did i fuck up!!! At least they were able to sew it back on.

Stock pilots will be fine, mains will be 320/330 range.

I have some 19cc for $45.00 shipped

I tried to get one locally ,with no luck. I ended up getting one fom Vito's and the price was only $21.95 http://www.vitosperformance.com/atv_parts/...=176&page=1

There is a bracket that can be bought so you can mount it back in the same place. I just took the bottle off and ran the hose down towards the ground.