ZillaRider02

Looking for a set of 8" rear wheels for a Banshee. Must be straight. Have PayPal.

Jim shipped my Shearer's yesterday also. I've got his aggressive dune port, haven't got to ride it yet. I'm also switching from T-5's to Shearer's. I plan on running 33PWK's. The 35's would make more peak HP, but you would lose some throttle response/rideability. The 35's, IMO, could be sluggish and make the bike seem to "load up" riding the trails. The 33's are a good compromise of response/top end pull. I'm also going from a -2" swinger to a +2" and some padla brats. Should be fun!

Some locals from another forum are freaking out over the free concert. They're not coming to Oklahoma, but they are playing in Dallas (2 1/2 hours away)

I'm running the 400ex throttle on my Banshee with stock carbs(for now). It makes a huge difference over the stock thumb number. There is a carb upgrade happening very soon and the 400ex throttle is staying for sure.

Send pics of the Vito's to HotRod72@Gmail.com

I was looking at those also, glad to hear some positive feedback :biggrin:

I ran a -2" on my Banshee with a mild dune motor (ported, Noss head, T-5's) and it was a ton of fun with a V-Paddle that doesn't overhook the bike. It would wheelie on command, even in 6th gear. Also, I rode some trails and it really helped the turning of the bike. I'm going to a +2" with some more motor work, as I ride 99% in the dunes.

Oklahoma Sports Park Ada,OK

Do a search here on the forums for a more complete response, but it is a tuning method used to check jetting.

Sound like you did your homework on making the combination work together. The stock carbs will be fine with this setup. The FMF's you have now will work well for all around power.

Stock compression (Depending on your elevation) was probably somewhere around 125 psi. Personally, I wouldn't run it lower than 110 psi. The bike will let you know when the compression is too low, as it will become harder and harder to start. My compression tester is an older Snap-On unit that is dead on accurate. I have checked it with a Craftsman ($40 at Sears) and one from AutoZone ($20 I think) and both testers were within 2-4 psi of mine.

This pic is from the dealer, the front windows have now been tinted to match the rest and Ventshades have been installed.

I did quite a bit of stuff over there with my old Quadzilla and even some Banshee stuff, but not anymore.

It's listed on EbAyEbay Auction

Brad, it's brand new, never opened. I would like $750, but willing to deal a little. I'm in Maysville, not far from you.

I've got a PS3 for sale that didn't sell on EbAy. It's the 60gb version with the Talledaga Nights Blu-Ray. I got stiffed by the high bidder on the auction, but the PS3 still needs to go. Make me an offer, I'll work with anybody on the shipping.

TTT

No, it doesn't have skidplate tabs.

Sounds good, EastCoast. I ran the -2" on a ported 350 with Toomey's, V-Force Reeds, NOSS head, etc. The motor made HP in the high 50's and was fun to ride with the shorter arm. Paddle tires in the sand wasn't bad, but the launches were interesting......

Where to start......The Cylinders are off getting ported, the new swingarm is in the mail, the Paddla Brat's showed up Friday,and the new carbs are on the way. All in all, a great Christmas......

-2" Round Housing Swingarm for a Banshee. I believe it's made by RPM, but no promises. I do know it's built very well and is ready to use. It's Silvervein with a couple of black "touch up" spots on the chain side of the arm, not sure why they are there. I've used the arm for 2 years with no problems, just going to a longer setup. You will need to supply your own carrier, but I'll throw in a useable Gold X-Ring chain with the arm. Price is $200 Shipped.

Here are a couple of pics of it. I'm not sure what the black "touch up" spots are on the inside and outside of the arm. I just removed it from the bike for the first time yesterday. It's straight with no apparant damage. I'm keeping the Carrier, but I will throw in a good used Gold X-Ring Chain that is perfectly useable.

I've got a -2" Round housing built by RPM racing. Built strong for MX or XC. It's Powdercoated Silvervein. I'm keeping the carrier/brake plate for my next arm. I'll take $200 shipped. I can get you some pics in a day or two.

PM Sent!

Selling this PS3 for a friend. Playstation 3 Auction