DIRTMAN350

Happy B-day man. Drink a few for me.

Happy B-Day. Drink some for me.

PM Dlnoss on here and he can get ya hooked up with the right domes for your mods and elevation.

Welcome aboard to the craze and addiction. You can find tons of info on here. If you have any ? on stuff i sure wen can help ya out.

Sounds like you got a good dilema going. Keep up posted on how it turns out.

Good one guys. Glad to see we have some good jokes to read on here besides the usual who's faster than who and How much hosepower will i have if i do this.

Yeah let's see a pic of your bike. Looks like some good readings too me.

Try dry ice it works better and gets cold enough to chill you beer if your in a hurry.

Have bought parts from cascade and have had great cust service here.

JUst loosen up your chain and spin the rollers. They should spin freely without any noises. If they don't spin freely replace them!

Just an idea check the gap on your pick-up coil. I had a similar problem with mine and found my gap on pick-coil too far out. That worked for me.

For sure do a +4 timing plate mod. From what i have read and heard that you are better off to run dual carbs over one carb. I have no exp with a single carb just what i have read and heard. Contact Jeff with FAST Racing and he can get going in the right direction.

For sure take it to a shop and have them check it out. By the looks of it it looks like any metal was big pieces. I would tear it all the way down and check everything over. While you have it apart mow is a good time to build up the engine if money prohibits. Good luck with your build and keep us updated.

Have a good one. Be sure to drink a few for me.

My prayers to your friend. Hope he pulls thru ok. Yeah cockyness is our own worst enemy.

How much do you want out of the front plastic incl tank cover and rad shroud. Let me know really interested.

Like the looks. How has you rpaint job held up? Sounds like a good idea to paint plastic. Did you use Krylon Fushion to paint it?

Let us know how it goes. I would be interrested in possibly buying and installing one myself.

Welcome. There is a ton of inof here for your taking.

Try BikeBandit.com for the oem springs.

Looks damn good. Post some pics when it all done.

I hate to say it man but i think you got hosed. Write it off as a loss and chalk it up to a leson learned in life.

I run the fmf fatty's and are really happy with them. Unless you have port work or stroker kit fatty's should work out for ya. Alot of guys seem to like t-5's but i can't comment on them being i have never ridden one with t-5's.

Hey guys i need your input on this one. I performed a search but got some mixed reviews. I just replaced my stock clutch with a tusk clutch and left the cushions in place. They all looked ok but the problem is with the clutch adjusted correctly my shee wants to creep forward with clutch lever pulled in. Should i remove the cushions and retry to see if it goes away. Will the cushions cause the clutch plates to hang up and allow it to creep forward with level pulled all the way in? Any help would be great.