No Limit Powersports

ttt

ttt

lol i said ti ts thats the technical term

Shearer small bore out a frames 2 out the left side for sale used one season very good shape. $550+shipping

12 paddle staggered extremes 22x11x8 on 8x9 .125 72 RO Only made about 4 passes on these still have the [censored] on the paddles. $550+shipping

An unplated DM is about 900 but that is not where the cost is substantial over the cub stuff the cost of the case work and peripherals to support it is where the DM cost grows over the cub stuff. On top of the fact if he already has a head reeds, intakes, ect... which none will work on the DM. But the DM power is amazing

We have carried both and tried both on the same bikes and the wedges are hands down better for traction we tried the 4 snow because of that article or a similar one that we read and they just didnt live up to the hype. The wedges are hands down better for traction on dirt havent tried either on snow though.

Some people run the wsm pistons with no problems but i have never had good luck with them. We run american made wiseco only. M&M ATV Pistons

8 days left!!

Most likely caused by a lean condition and it got hot. 1st rule when starting a new motor should be make sure you can shut it off never trust the kill switch lol (chain has to be on, be on the bike) Never let the bike set there and do that for no minute get on it throw it in gear and kill it. The smoke could likely be coolant if its a oring/head gasket, but also you could of blew it up if you let it lean rev for a minute and half???

HOHOHO

I dont, sorry Im all out and David doesnt have any in stock either. I do have the machined though. Thanks Andy

I would not do a tz bearing without straight cuts. The tz bearing is a needle type bearing and is not made to take any side load like the ball bearing style max load. With the helical cut drive gears there is going to be some side load which is not good for the tz bearing. The tz is a great bearing but i wouldnt recommend using it without the straight cuts.

TTT

They are listed on the page they run $65 for normal stuff $75 for custom stuff You know the heads work better with M&M on them lmao jk See you got your specials up and running looking good. Merry christmas to everybody!

Wanted to wish everybody a happy holiday by running some Christmas Specials!! With the economy the way it is we know times are tough so we are doing are best to try and make every bodies Christmas a little better by saving you all some jingle. 1st Blow out special! Noss Machine Heads -- $156.00 WHILE SUPPLIES LAST LIMITED QTYS Swingarms -- $599.99 -- Round tube, Show Chrome, Round Carrier, Carrier Included, Brake line Clamp, Brake Line, Pivot Bearings Installed, and caliper mount --- THIS IS ABSOLUTELY EVERYTHING YOU WILL NEED TO DO A NEW SWINGER WITH THE HONDA STYLE CARRIER!!! Billet Gas Caps - $34.99 all colors and styles M&M ATV SPECIALS M&M ATV SPECIALS PAGE 2 We wish you all a happy and safe Holiday M&M ATV

Cubs are available in 65mm 66mm 68mm and 72mm(super cub) Cheetahs are available in 68mm 72mm and 73mm and up from there with the cheetah DM and so on...

What plug are you running? What bore size is the motor (stock cylinder?/cub/twister?) 18cc dome doesnt mean anything without bore size so we can get some idea on the compression ratio. Also what piston are you running and what angle did you have your squish band cut at? Is it just one plug or is it both? What type of meth are you running?

Here is ours it looks pretty trick M&M ATV Stator Cover

250 for carbs and filters

upupup

Nope dont have any bottle on it just my duner... 554 thats right...

.My silver bike is a 350 cub and my black bike. Is a 4mm DM both full trim stock chassis dune/drag bikes

Thanks for posting the vids wes. I dont know how or why or could really care less but somehow you managed to upset a few people at the race. Not going to get into the details of who said what, they didnt have you confused with anybody else they very specifically pointed you out to me and told me what you were driving when you pulled up. I just want everybody to come to the race and leave there attitudes at home. I had a good time racing with Kenny,Scott, and everybody else that came. The last video that you posted was the money races the rest was all of us just playing around. Im working on getting the lights down to Tracy so we can really have some races. Ill let everybody know when the next race is and hope everybody can make it.

As soon as i figure out how to get the 8mm tape to digital ill post up some vids!