Wassup350

You can also have the stock carburetors bored out. I'm not sure how much you can have them bored but it may be a little cheaper. Ask a local shop if they do it or know a machine shop who can do it.

As led said, what insurance?

Get the banshee, get a job if you dont have one allready, then get an ol pickup. Thats all you need- Quad, Truck, Job.

BlueTraxx has some nice videos, i think a couple of the short track clips work but they arent very long.

Unless your an experience rider. dont get a shee. If you are experience and you're willing to ride hard and get the ultimate thrill machine, get the Banshee. If you buy one break it in like your gonna ride it, just dont floor it till you get it broke in. Once you break it in you could probably jet it down a little bit so it wont foul plugs. Out of the factory Jetting is a little rich and break in oil ratios are rich so you might foul plugs if you lugg it when you break it in.

Hmmmm there is a reason for that being there. Where do you think the coolant is gonna go when it heats up??? all over your bike.. You should relocate it up front in between your shocks. Or some wheres up there.

That is neat, too bad they dont come up with an original name for it.

That sux..... Banshees i think are notorious for throttle stickin, especially if you have tors removed. Hope you feel better. Hope that teaches everyone to take the extra minute to strap your helmet down also.

LOL i wouldnt do this with the shee but i use to hold my Trail blazer at WOT for miles. It still runs like a champ too, gotta love american built machines. I held my shee at WOT b4 for too long b4 and blew it up pretty bad, don't know how long i held it though.

I found this off of Bluetraxx, it sounds awsome and ripps. http://www.mysterybike.com/Uploads/RZ350_i...uarter_2meg.wmv

ripp around the driveway or road a little bit at test that baby out, when you get er done.

Depends if they are bigger or not, if they are the same as stock then its kinda pointless to get them. I personnaly would rather have mikuni though.

thats great

I plow out my field with the John deer and take the fourwheelers out. It's the way to go.

I had the same problem with mine a while back. It is probably a worn out needle jet. Make sure that the needle seats into the slide good, and make sure that the c-clip is not too small or it will get pressed up. That's what mine did. Also make sure none of the jets are clogged. You might just want to take your pilots out and clean em out real good, you should be able to see through them. Make sure that you use the right screwdriver also, you dont want to strip the pilots as they are expensive...

i think they gave me the one for the foam because the filter will fit right over the stock mount but it wont fit over the adaptor. i feel stupid for buying it but what kinda asshole sells that knowing it wont work together. i figured in the picture that he had them apart to show the adaptor and what not. oh well i got both adaptor and filter for like 40 bucks, and i think brand enw the adaptors are like 45 anyways.

I recently purchased a k&n air filter w/ proflo adaptor off of ebay. The problem is the filter wont fit onto the adaptor. Is there suppose to be some sort of hose or is it suppose to fit right over the adaptor???

I'm not positive what direction you go with this, but if i want slack or to get it to unslack, i usually hold the rear brake down then move it forward or back. Make sure everything is loose too.

This is a great idea. Who ever wants to make clips for it and doesnt have a camera, they can borrow one from someone or something like that. I beleive the also make cards for computers that you can hook a camcorder up to them. About the hosting thing. If you can't host videos just send them to someone who can via aim or icq or email.

I don't even bother taking the shee out unless the snow is very hardpacked. That high rpm power wont help you when your in snow your tires will just spin. My advice- If your gonna ride with the boys on their fourwheelers get a sled and smoke em. If you cant afford a new one just get like 200 bucks and get an old ski-doo elan or an older arctic cat eltigre or something. You wont have much trouble keeping up and wont get stuck

Thats a good idea! I think i might do that, it would make it much easier to keep the lights clean.

Any of you ever ride the trails on big Pocono. They are great!!! i dont know if your alowed to ride there any more but i went up there b4 and its awsome!!!! the trails are very wide but a lot of em are a bit rocky.

If you want snow you can have all you want up here in the TugHill Region. We have like 2 feet here and like 3 feet in the town up the hill. Its great snowmobiling.

I ride trails, and an occasionaly i hit the little ammount of dunes around here. Theres a great hill not far from where i live and there are awsome dunes on it!!!

I use to live down in Tannersville, i was born in east stroudsburg. I'll be down in that area when summer comes along, since my family lives down there.