Fireman-hott

Well a fourth one turned himself in last night. So they got all of them and from the inside info we've been getting from knowing all the cops, the prosecutor is gonna push for the death penalty and doesn't see them having a problem doing it with it being in such cold blood. Her friends mom didn't find out her daughter was killed till almost 10 hours after we found out, man hearing her call and talking to her because my mom couldn't take it, fuck that just made it worse. As for beating the shit outta them, I fielded damn near a dozen calls asking if I was gonna need some help dumping some bodies, with half those wanting to know if the cops found them otherwise they were leaving that minute looking to take and eye for an eye. And the ones that called without a doubt would have done it. To be honest them guys will be safer in prison than on the streets because they'd be dead right now without a single doubt in my mind. Man its one of those things where 5 minutes later and she probably wouldn't have been there. The guys knew what they were doing, they had bulletproof vests and shit on, an assualt rifle and a couple handguns. Dont worry guys I"m not gonna become some anti-gun nut. My head hurts real bad from last night, as will my ass from those hooters wings. One of those let get you away for the night and get your mind off that.

Oh even if they rot in hell I'd still be a tad disappointed. My family knows all the fireman for the city and some/most of the cops. A close personal friend of y fathers was the cop tracking them with his bloodhound. The guy said it went straight from the house to these guys without even so much of a deviation from the trail, and that they found the weapon during the search along with easily enough forensics to nail these guys dead to rights. The parts that most fucked up is my sister, her friend, and the other guy that were killed had nothing to do with anything. They were just thier waiting on my sisters friends boyfriend to showup and they were heading out. The other two that were critically injured is who these guys were after. Killed em execution style shotgun to the back of the head. Didn't even have the balls to look them in the face when they did it. Let me tell you to wake up at 2am to a friend you haven't heard from nor seen in 2 years telling you he heard about a shooting about 10-15minutes ago and that your sisters name was brought up. Man that walk upstairs than downstairs without seeing her home was like getting hit in the chest. Than having to call my dad and say his daughter might be dead. Fuck fuck fuck.

Well my youngersister just got killed. Wrong place wrong time 3 fuckers walked in with shotguns and blasted 5 people, one being my sister killed 4 and the 5th is in ICU he/she is in pretty bad shape. Didn't even say anything according to the witneses, just walked in emptied the shotgun and took off. Cops got all 3 already.

domes lifting up on the pro design? I run a pro design and have never heard of this nor seen it. I know its jsut like the noss head with the way the domes are kept in there and if you don tline that notch up correctly they will not seat right, but hell you should be able ot see that, than when you torque it down the bottom half of the head holds the domes in place. Anyway back to the original post, you should have no problem running the trinity head, non at all. Make sure your domes are cut correctly for the bore size if your running anything other than a stock bore/stock stroked cub.

our pipe is cracked open? Thats why it runs for shit. get that fixed or something. 2 into 1 should beat a stock shee in a drag.

Yeah I'll be doing some trail riding with mine. Now that the weather is nicer some dragging at the strip when it opens up the first weekend in April. I dont know of any dynos close by or I'd take it in.

cylinders, porting, the performance pistons, stud extenders, cut domes was $1430 from McCoy. they are selling for $900 than $200 for the port. or from A&S which is $875 and $250 for the port.

I plan to when my 68mm stock stroke set arrives Friday/Saturday.

Last I heard they were shot down. Apparently the wording on the banning of ATV and Pocket Bikes conversed through motorcycles,dirtbikes, and ATVs. So yeah the AMA and ATVA were all over it. It was origonally supposed to just ban pocketbikes and keep people from riding them on the roads which is an enforcement issue and not a legislative issue. But of course ATV's always get added in. Than the committee was asking why no land has been opened up for legal ATV riding and what the holdup was. All in all it went good from what I have read.

Personally I wouldnt store anything of value in chi heights. My fiancees mom lives in sauk village. Ford heights was the poorest city in the nation at one point, hell might still be. Fords right next to chi I believe too. buncha crackheads I almost hit one everytime I drive through there in the late evening/night.

That would be Vida from FHM. Even says it on her ass. Personally I like the boucing boobs on the milk girls.

You will need to larger pistons. Also you will need big bore domes for your coolhead. Regular pipes will work fine. Big bore pipes are more for the larger cc. I think for the big bore pipes 420cc is the lowest level they recommend. You will have much more bottom end torque to work with, and out running other shees is fun

Ones my mother and ones my fiancee. Tell he rnot to worry about the back brake hell 90% of the time I never use mine. I'd wear a knee brace or some ace on the knee just incase she does fall off though. Getting hurt is easier if the part has already been injured once. They both love to ride the quads. Hell my mother is bugging the shit outta me to ride my shee again. But now its all decked out Idont know if she can handle it.

stock pipes are restricted in flow to meet certain epa requirements, by adding aftermarket pipes you will allow more flow through the cylinders more flow = more horsepower.

Although some may say I'm biased now, I run rockets in trails and keep up with vforce 700s. To each his own.

Was looking tp upgrade to some cubs. Anyone want a set of 404cc big bore cylinders. Perfect condition only a cleanup port on it, Didnt blowup or anything. Looking for $500 shipped to your door. e-mail me at [email protected] or PM me. I plan on having it off by tonight. Pistons included.

Well you probably upped the compression giving you more bottom end. Enjoy it like it and ride the hell out of it already quit putting around.

Well some of our media is finaly backtracking and admitting there were WMDs. Check up on it the New York Times in the last day or so released an article on it.

Difficulty has nothing to do with it The guys thats gonna be welding for me hell man it was just as smooth as his mild steel welds. Just everything goes up from stingers to pipes to this flange and that flange, really I dont have the moola to cover the overhead right now. Maybe 6months or a year from now I will and I'll do a small order and see what kinda return I get from people on it. I'd love to do stainess like I said but fuck man the overhead is more than I can afford right now.

Your stock brake lines will fit fine, mine do. You can use stock tie rod ends also, but you will need longer tie rods.

With the amount of itme they have in R&D they will make your shit haul ass. Talk to Rocketpig on here he works for Trinity and can usually fix any customer service problems you may run into. I have a 420 big bore with thier turbo head mod for stock head and thier mx port and it straight hauled ass.

Drive on a parkway, park on a driveway? If I have sex with my clone am I considered gay or am I masturbating since im fucking myself.

Just filled up at $1.99. Was $2.15 3 days ago. I read an article like that led and the OPEC guys were basically sying the prices dont have shit to do with the output as they are producing almost a million more barrels a day than last year when the price was $1.54/gallon on average.

Need the right side stock a-arm. Buddy flipped his quad and bent the hell outta it. Need it well before Sunday so we can get back out.

Damn I've been out all day, and was scrolling through was gonna reply about the stainless but RNBrad said more than enough. Stainless is the only way to go really, hence the reason I'd really like to get them done in stainless instead.