Polish Posted November 28, 2006 Report Posted November 28, 2006 This is my flywheel disaster..........while traveling out to China Wall ......and doing a lot of runs up and down the hill........I found myself broke down about 4 1/2 miles from camp..........we were leaving and about 5 min away from China Wall......my Bike went POP...........I thought for sure it was my crank............But by kicking my bike over all the compression seem to be still there......(just no spark).......switched coils with another banshee........and still no spark!!!!!!.........so I tore off the stator cover and this is what I found...................Look at this mess....... Quote
[email protected] Posted November 28, 2006 Report Posted November 28, 2006 that honestly looks LOL horrible ! Youll get it fixed man... I might have a stock flywheel laying around you can have. Quote
jbooker82 Posted November 28, 2006 Report Posted November 28, 2006 Who did you have lighten your flywheel? Looks like they took to much off. :: Quote
thegroup Posted November 28, 2006 Report Posted November 28, 2006 ive done that before, only difference was that i did it by using the wrong type of puller(used a hymonike[sp] balance puller) and pulled the outside off the center adn ripped the stator in to just like the way urs looks. :shoothead: at leasts it didnt come apart ina million pieces and hurt someone :beer: Quote
Malott 1 Posted November 28, 2006 Report Posted November 28, 2006 I've heard of lightend flywheels coming apart but this is the first one that I have actually gotten to see. That sucks. I don't know if I will lighten mine now or not. Quote
wesw Posted November 28, 2006 Report Posted November 28, 2006 (edited) who cut it?? they tried to remove more weight by putting those holes in the face adn it weaken it. sucks. i had BDBANSHEE CUT MINE not sure how much he removed but it works fine. revs faster for sure. Edited November 28, 2006 by wesw Quote
Polish Posted November 28, 2006 Author Report Posted November 28, 2006 Well I wont say who done the work for me.....but the fly wheel metal that is left sure is THIN THIN.......almost like sheet metal thin...........I just hope that my crank is still trued............it was so damanged :: that honestly looks LOL horrible ! Youll get it fixed man... I might have a stock flywheel laying around you can have. good lookin out chase....let me know what you want for it :beer: Quote
locogato11283 Posted November 28, 2006 Report Posted November 28, 2006 thats fuckin crazy. that thing really didblowup. ha. PM NYUK, hes parting out a bike and might have some shit layin around. Quote
RNBRAD Posted November 28, 2006 Report Posted November 28, 2006 Might check out Ricky Stator as well. If you do any night riding their flywheel and stators help out a bunch. Adj timing plates there are cheap as well. Quote
Polish Posted November 28, 2006 Author Report Posted November 28, 2006 After a few BLOODY knuckles............I finally got it removed..................I havent decide if I want to go with Ricky Stator or someone else...............it seems that RS is really the only guy to turn to!!!!..........GOT LIGHTS???............RS has the whole setup with plate and flywheel for around $300 Quote
NYUK Posted November 28, 2006 Report Posted November 28, 2006 it happens. price you pay when too much is taken off. Quote
csrmel Posted November 28, 2006 Report Posted November 28, 2006 who ever cut that thing took way too much off the outside of it. the holes that were drilled? have nothing to do with it. they just took too much off with a lathe. you lucky that thing didnt grenade and take a chunk out of youre calf. Quote
Bansh-eman Posted November 28, 2006 Report Posted November 28, 2006 he's lucky i found some dude with a sand rial to drag him back to olds so i could pull him down sand highway on my old ladys quad... there was NO WAY i was getting him through those dunes... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.