banshee350twin Posted March 11, 2006 Report Posted March 11, 2006 How do u think my banshee will go with a esr powervalve fully ported 404 cylinder and 4 mm crank 35 mm carbs go and what u think it be pushing for horse. thanks Quote
rocketboy Posted March 11, 2006 Report Posted March 11, 2006 depends on the porting. it may make anywhere from 55-80 hp Quote
twincylinder Posted March 11, 2006 Report Posted March 11, 2006 the numbers can very quiet a bit depending on what else your adding to the setup..pipe choice will make a big difference. Quote
broke Posted March 11, 2006 Report Posted March 11, 2006 Buy a Cub or Cheetah. The results of these motors just do not lie. What the hell does "fully ported" mean? The guy knows his shit when it comes to Hondas, but the Banshee top end just isn't a proven block as of now. Quote
banshee350twin Posted March 11, 2006 Author Report Posted March 11, 2006 wait wait i might look at the cheetah kits of trinity Quote
banshee tuner Posted March 11, 2006 Report Posted March 11, 2006 You're going to pay more for anything with the trinity name. There are lots of other brands out there that are just as good or better for less money. Quote
banshee350twin Posted March 11, 2006 Author Report Posted March 11, 2006 name them please im thinking of the 482 kit Quote
banshee350twin Posted March 11, 2006 Author Report Posted March 11, 2006 well everyone nows bout cheetah's what would the horse be on a 482 with a good port job and pipes filter all that little stuff and if i had higher gearing what could i hit for speeds Quote
broke Posted March 11, 2006 Report Posted March 11, 2006 You will go really fast. Trinity sucks, go with anyone else. All builders can get Cheetahs. Trinity is just a big name. You will probably be happy with having your stock jugs ported for a 4 mil, but that's just my opinion. Quote
banshee350twin Posted March 11, 2006 Author Report Posted March 11, 2006 who are the outher biulders got any sites i can go with. well everyone tells me to go with cheetah Quote
banshee332 Posted March 13, 2006 Report Posted March 13, 2006 (edited) who are the outher biulders got any sites i can go with. well everyone tells me to go with cheetah 485381[/snapback] Passion racing. http://www.passionracingengines.com/ Edited March 13, 2006 by banshee332 Quote
BigRed350x Posted March 13, 2006 Report Posted March 13, 2006 Why are you so concerned with your HP numbers? Passion Patriot Racing F.A.S.T. Gorr K&T There are lots of them out there, so a search. Quote
Shee-Male Posted March 13, 2006 Report Posted March 13, 2006 I've seen and worked with jugs and other components from ESR and I find there product crap!, roughest hone I've ever seen on a cylinder not to mention the .005 taper out of the box! Quote
banshee350twin Posted March 13, 2006 Author Report Posted March 13, 2006 Im just gonnda go with bansheesuperstore and go with a cheetah and 4mm crank im gonna try to stop posting as much to Quote
Wicked98Shee Posted March 13, 2006 Report Posted March 13, 2006 i'd get with jim @passion he can hook ya up with what ever ya need and ya can't ask for a better person to deal with. we just had a lil 90 done up by passion and its like OMG 25hp outt that, im sendin a set of cylilnders for a lil passion to go on wifes bike. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.