Play axle prices

[Ayesully810]

50 minutes ago, locogato11283 said:

Yep.. Way lighter. The pay axles are very durable. I have one on my 06SE bike.

is the play axle still 10+ lbs lighter than stock? or is it just the drag axle that is that light, i saw that the play one is solid not gun drilled

[locogato11283]

Both. The drag axle is drilled. That’s the only difference. They’re very close to the same weight.

[2004LEBanshee]

Any tips on how to take an un anodized jja axle apart. All the hubs seem stuck.

 

[locogato11283]

Any tips on how to take an un anodized jja axle apart. All the hubs seem stuck.
 

Yea, big hammer and wood block or a non-marring hammer and beat them off. Then buy an anodized axle.

[2004LEBanshee]

Wish I knew this ahead of time.

[n2otoofast4u]

Any tips on how to take an un anodized jja axle apart. All the hubs seem stuck.
 

Back the bolts out past the split. Put a penny in the split and snug the bolt up again the penny to separate the hub just a bit. Remove.

[n2otoofast4u]

Ended up getting the mod quad play axle, they had free anodize options, better overall pricing and shipping rates
Very easy to deal with compared to the other venders i contacted

J
U
N
K

[locogato11283]

J
U
N
K

Tried to tell him. ‍

[2004LEBanshee]

15 hours ago, n2otoofast4u said:

On 12/20/2018 at 10:39 PM, 2004LEBanshee said:

Any tips on how to take an un anodized jja axle apart. All the hubs seem stuck.
 

Back the bolts out past the split. Put a penny in the split and snug the bolt up again the penny to separate the hub just a bit. Remove.

That's brilliant. Thank you.

[87sheerips]

here u go

https://www.jdscustoms.com/product/yamaha-drag-hillshooter-and-play-axles/

 

[Tedder]

On ‎12‎/‎21‎/‎2018 at 9:01 AM, n2otoofast4u said:

On ‎12‎/‎20‎/‎2018 at 10:39 PM, 2004LEBanshee said:

Any tips on how to take an un anodized jja axle apart. All the hubs seem stuck.
 

Back the bolts out past the split. Put a penny in the split and snug the bolt up again the penny to separate the hub just a bit. Remove.

^^ Yes sir but be a high roller and use a nickel

  

[Canada]

So the rotor and sprocket go on the inside of the hubs?

If so, how do i change them? mainly asking for i do sprocket gearing changes.

[Canada]

Also what side do the wide and narrow spacers go, thanks

[375hp banshees]

Got to remove the Hub every time you want to change sprockets . should have bought a Jj&a

 

 

 

 

 

Jk...yes hubs go out 1"spacer is for brake ( larger 1). take all the sprocket bolts out n u can feed it off , not rotor tho iirc

[locogato11283]

LOL