Motor mounts

[Tedder]

Does anyone sell polyurethane motor mount bushings for Banshee's? Looking for something that's tough with very little give but not metal.

[JTmachining]

Does anyone sell polyurethane motor mount bushings for Banshee's? Looking for something that's tough with very little give but not metal.

Do u use the OEM mtr mount washers? If so how many? Why are u wanting something diff? To answer ur question IDK but OEM worx good

[Tedder]

Sorry my description of what I'm looking for wasn't clear. It's the bottom dog bone mounts under the motor that I'd like to stiffen up

[JTmachining]

Sorry my description of what I'm looking for wasn't clear. It's the bottom dog bone mounts under the motor that I'd like to stiffen up

Those are the lower mtr stays to lower mtr mounts. There's solid titanium etc options available. There's also heim rod ends available with TI or CF links. U can also fab solid frame mounts

[Tedder]

Thanks John but I'd like to stay away from anything that's rigid as solid metal but with more backbone than factory rubber. It's motor twist on my asphalt launches that I'm trying to control. 

[JTmachining]

I have solid lower frame mtr mounts and Delrin bushings with TI

[JTmachining]

Thanks John but I'd like to stay away from anything that's rigid as solid metal but with more backbone than factory rubber. It's motor twist on my asphalt launches that I'm trying to control.

Sorry but anything not solid isn't going to help u. Not sure why u are against something solid other than vibe...that's why I used Delrin

[Tedder]

OK Thanks anyway

[wfobasheeboy]

This is what I am running. Works great.

 

 

Sent from my iPhone using Tapatalk

[locogato11283]

Sounds like you need the JDS motor support or something similar. That eliminated all the twisting of our big motors.

[trickedcarbine]

Does anyone sell polyurethane motor mount bushings for Banshee's? Looking for something that's tough with very little give but not metal.

Thacker posted something a while back on face book about an automotive bushing that worked from Energy Suspension. I'll see if I can dig up some info.

[trickedcarbine]

 

 

Sent from my iPhone using Tapatalk

[Tedder]

Thanks everyone for your input.

[JTmachining]

Ur trying to stop movement. If mount moves so does mtr

[Tedder]

I suspect you're used to working with much higher power applications than my junk and don't think I'm going to have any success with anything other than something rigid. I appreciate that your trying to help but I don't run big motors and haven't had a terrible time with twist. I get some scrubbing on my front sprocket and just thought I could snug things up a little with something like a polyurethane type material vs the OEM rubber insert.