01BANSHEE20 Posted March 24, 2013 Report Posted March 24, 2013 I have a 1999 banshee at first I couldn't get it to rev it was to do with the tors. I took the green and yellow wire coming from cdi and put it on the black and white wire coming from the cdi and it revs now but it backfires like crazy. And won't rev up all the way or move. So I need ideas. Checked timing it's good. Cleaned carbs. Reeds are good motor is solid with good compression. Tried different cdi. Coil is good. Exhaust is not plugged. Idk what to do. Thanks in advance Quote
Zillaguy Posted March 25, 2013 Report Posted March 25, 2013 try unplugging all the TORS stuff... If that doesn't work, chances are your looking at a new stator... Had this same prob. on a customers bike, swapped out stator and it was all good.... Quote
hoppedupandcutdown Posted March 25, 2013 Report Posted March 25, 2013 The black/white wire kills the motor when grounded, I can't imagine it would be a good idea to hook the green/yellow park brake wire to it. Quote
01BANSHEE20 Posted March 25, 2013 Author Report Posted March 25, 2013 yeah i checked the reeds there good. and it seems though by looking at it the stator is brand new. with the stock wireing colors... im stumped. and the tors is completely cut off the wiring harness. Quote
nightmarebanshee Posted March 27, 2013 Report Posted March 27, 2013 make sure your emergency brake isnt engaged...had that same problem my emergency brake cable was stretched so it looked like it wasnt on when it actually was Quote
hoppedupandcutdown Posted March 27, 2013 Report Posted March 27, 2013 Did you ever get yours figured out? Quote
375hp banshees Posted March 27, 2013 Report Posted March 27, 2013 green / yellow on cdi is parking brake wire it limits the rev if it's grounded via the p-brake sw. or another ground look at the 2nd vid in general lee's no go post below & see if that's what it sounds like 1 Quote
01BANSHEE20 Posted March 28, 2013 Author Report Posted March 28, 2013 YESS it is doing that exact same thing!! Please help. What could it be I've tried everything it I just wanna ride :/ Quote
375hp banshees Posted March 28, 2013 Report Posted March 28, 2013 remove the green yellow wire & don't let it touch any ground (,unless u want your p-brake switch hooked to it then find harness or run a new wire to it & it will ground it's self w/ the brake on)... I don't remember what the black wire is for that you hooked the green to... might want to look into that later?, more than likely it's just a ground Quote
hoppedupandcutdown Posted March 28, 2013 Report Posted March 28, 2013 The black/white wire kills the motor when grounded, I can't imagine it would be a good idea to hook the green/yellow park brake wire to it. Do my posts not show up? Quote
01BANSHEE20 Posted March 28, 2013 Author Report Posted March 28, 2013 yes your posts show up and i apreciate it guys. my green yellow wire isnt touching anything anymore cause it just revved and backfired. it has an aftermarket stator in it could that be it?? Quote
375hp banshees Posted March 31, 2013 Report Posted March 31, 2013 what did you do with the yellow white and/or the black white wires ...all you did initially was what? -just hook yellow white at cdi to black white at the cdi together (what tors wires did you mess with?)...it rev's fine now just backfires (can you tell if its both sides or just 1?) might want to change the plugs Quote
LawDog Posted March 31, 2013 Report Posted March 31, 2013 Check the caps on the spark plugs. Mine was back firing a lot and that's what it was. The reving Idk try what they have been telling you. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.