SlowerThanYou Posted May 9, 2015 Author Report Posted May 9, 2015 We picked up over a tenth an half in ET & 9 mph over our best previously. So it runs better than it ever has? It's getting quicker! We still have some work to do with this motor & set-up. 1st it needs to get on a dyno & 2nd we need a different chassis. The chassis is 80 - 90 lbs. heavier than most. Quote
n2otoofast4u Posted May 9, 2015 Report Posted May 9, 2015 The chassis is 80-90 heavier than most? Quote
JTmachining Posted May 9, 2015 Report Posted May 9, 2015 The chassis is 80-90 heavier than most? LOL Quote
SlowerThanYou Posted May 9, 2015 Author Report Posted May 9, 2015 The chassis is 80-90 heavier than most? Our quad race weight is in the high 300 lb. range. It's a good chassis, but out dated. Everyone is really keying on weight reductions. One bike even had no brake system! Yes, PSDA addressed that one. We, you & other's saw that problem coming with the lack of rules. Quote
dozer Posted May 9, 2015 Report Posted May 9, 2015 if it weighs 300lbs its a good 50+ lbs heavier than a few anyway. Quote
SlowerThanYou Posted April 3, 2016 Author Report Posted April 3, 2016 After having a great outing with the DMX @ the BAKO Drags. A few changes are being made to the port timing & a few bars being changed in the chassis. It goes to Dome Valley next weekend for testing. Here's a pic of the new chassis. 1 Quote
J-Madd Posted April 3, 2016 Report Posted April 3, 2016 That looks like it weighs about 205 lbs race ready. Did you have any problems staging with the front sticking out that far? Quote
SlowerThanYou Posted April 3, 2016 Author Report Posted April 3, 2016 That looks like it weighs about 205 lbs race ready. Did you have any problems staging with the front sticking out that far? I wish, 230 lbs. race ready. I didn't go to the debut race, but Angel didn't say anything about staging problems. Quote
SlowerThanYou Posted April 3, 2016 Author Report Posted April 3, 2016 Billet cases now? Yes, with a bunch of other changes. 1 Quote
sleeper06 Posted April 4, 2016 Report Posted April 4, 2016 That thing looks like a potato chip bro , nice nun the less Quote
locogato11283 Posted April 5, 2016 Report Posted April 5, 2016 Were you getting flex with the OEM cases? I can't remember and I'm too lazy to read. Quote
n2otoofast4u Posted April 5, 2016 Report Posted April 5, 2016 Were you getting flex with the OEM cases? I can't remember and I'm too lazy to read. Standard stock case adapter plate issues. Quote
SlowerThanYou Posted April 5, 2016 Author Report Posted April 5, 2016 Were you getting flex with the OEM cases? Standard stock case adapter plate issues. There was some binding issues from the welding & like Green said adapter plate issues. I'm happy that the majority of issues, besides the cases. Have gotten fixed. The biggest problem we have now is the 90 ft. lbs. of torque! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.