cheetah cub with 2 into 1 intake

[chrispy56]

Has anyone used a 2 into 1 carb set up with a cheetah cub 392cc or 421cc. I have a 35mm pwk on my stock engine and I am happy with it. Would a 38mm work with the 392cc or 421cc? Also, how much stroke will the case allow for before I need to clearance it?...The 421 uses a 4m crank

[Nightmare]

No, that would suck, mite as well throw some stock pipes on it too. dual 35"s would be much better

[n2otoofast4u]

Has anyone used a 2 into 1 carb set up with a cheetah cub 392cc or 421cc. I have a 35mm pwk on my stock engine and I am happy with it. Would a 38mm work with the 392cc or 421cc? Also, how much stroke will the case allow for before I need to clearance it?...The 421 uses a 4m crank

 

 

421cc??? That is HUGE!!! Who do you buy that from?

[Coupelx]

Oh what the fuck. Go buy a fucking 400ex.

[cline]

421cc??? That is HUGE!!! Who do you buy that from?

 

I heard Wal Mart is a good start with a good price!!!

[BigRed350x]

(Face-Palm)

[chrispy56]

WOW! OK. I didn't really gather much info from those replies...So, in other words when in the 392-421 range , two 35mm carbs or better are needed?

 

n2otoofast4u-Trinity

[zach45]

Doesn't cascade do this with Paul turners?

[coryv4]

n2otoofast4u-Trinity

that right there is enough to make me throw that motor in the trash

[chrispy56]

Doesn't cascade do this with Paul turners?

 

Yes. They do a 396. But they dont give much info about it. I was hoping someone on this forum had some experience with a similar setup.

[Burt Reynolds]

You can run up to 4mil stroke without case work. Your going to want 2 carbs for a cub

[Larry's Shee]

Anything 2:1 on a banshee is for pussies or dumb asses (except for turbo). If you are to stupid or lazy to tune two carbs stick to a Warrior or 400ex. Why would you spend big money on a Cheetah and leave 25% of your horses in the barn?

 

BTW, welcome to BHQ !!

[mike0chek]

in run 2 35mm's with my 421 and would not go smaller!

[BigRed350x]

in run 2 35mm's with my 421 and would not go smaller!

 

(face-palm)

[firebanshee]

Has anyone used a 2 into 1 carb set up with a cheetah cub 392cc or 421cc. I have a 35mm pwk on my stock engine and I am happy with it. Would a 38mm work with the 392cc or 421cc? Also, how much stroke will the case allow for before I need to clearance it?...The 421 uses a 4m crank

 

 

Why would you ever want to do run a 2 into 1 set uo on any motor ? There is no performance gains running 2 into 1 set up, you will lose performance. Dual carbs set up properly will run circles around any 2 into 1 set up.