locogato11283

Here is me on my Stellar M&P +8 arched ladder swingarm. No one abuses these like I do.

Dude, this is BansheeHQ not BlasterHQ.

These fucks are going to let that corn sit all winter I think.

I've got $17. Can I get the front Fullbores? Thanks.

I have owned Quicksand, Stellar and Laeger a-arms and have never had to ream anything.

If you think the PC are peaky, you will want to stay far away from Shearer's. You need some Rockets.

Fucking horrible.

I haven't seen too many T-Rex motors run, but Jason Kearn's ran hard as fuck at the BHQ Ride... https://www.dropbox.com/sh/rbbmhhbuwdvo2y8/N8xNg69qGh/BansheeHQ%20Ride%202012%20from%20Bob%20Bruton#f:SAM_0136.AVI https://www.dropbox.com/sh/rbbmhhbuwdvo2y8/N8xNg69qGh/BansheeHQ%20Ride%202012%20from%20Bob%20Bruton#f:SAM_0137.AVI

I say ban that motherfucker. Someone alert a mod.

There will be no stubble. I will take the mower out there and knock it all down to nothing. The dirt behind my house is some hard hooking dirt. I do most of my gearing testing out there. It's a perfect spot for drag racing.

Word. These fuckers better have the corn out by then so we can do some dirt dragging. I have several sets of cut tires for anyone needing some.

That blue and white is sick.

I saw it in person from 6 feet away.

Well, it's that time again. I am hoping they get the corn out of the field behind my house before then, but who knows. It will probably be cold anyway. We can kick it in the shop, grill some food and work on bikes in the comfort of 90 degree temps. Where: Banshee Headquarters When: November 3, 2012 Time: 10AM Anyone is welcome to come. I have a big driveway with lots of parking.

Performance Plating in Olathe, KS did a used set of Shearers for me for $300 with about a 4 week turn around. Brown's Plating in Peducah, KY just did a set of used Shearers for me for $600 with a 7 day turn around time.

I thought you weren't supposed to be within 300' of a school or park?

Ours? Your boyfriend move in with you?

http://bansheehq.com/yz-banshee-specs-sponsors.html

Yes No

Ohh OK. I don't need anymore adjustment. In fact, fuck all that shit. I put these on and they were set in like 5 minutes. Yea, they are 3/2 wheels. That's what I have always run. I guess I could have gone with a +3 arm and the 4/1 wheels but it's a little late now and I didn't know I'd have to deal with all this. I'm not sure I would ever notice the difference hillclimbing the bike. The bigger nut came from the hardware store and the jam nut is the one that came with the arms. No, it's not a lock-nut. I am going to loosed it up and put some blue Loc-tite on the threads. I seriously doubt it will go anywhere.

Yep, just barely. I think I'd have to have an 18 "+ shock to have no issues at all.

Mine does not have caster adjustment. Actually, the force is on the skinny jam nut. If you think about it, there isn't any force on that lock nut unless the suspension is full extended. The force comes from the suspension under compression when the top of the spindle is pushing the ball joint in towards the frame. To me, a bigger nut should be used on the outside, but every Laeger pic I have seen has it set up the way I have it.

That's a good deal for these pipes. Buy them, mod them to fit right and send them out for real chrome. You'd have about $650 in them.

They'll work. Just gotta mod my nuts. For sure. I got a killer deal on them because I know the guy that owns BansheeHQ.