Pastrykiller

Got the outer plate for the clutch to include hardware and barnett springs Might have a pushrod and ball as well. Pm me if interested

X2 on putting sealant on the keyway.

Methanol is cheaper per gallon. Catch 22 though, u will use twice as much methanol as 110 octane and end up spending more per trip. 110 at the pump averages 8.00 a gallon at today's prices. 2 55 gallon drums of methanol versus 1 55 gallon drum of 110..... You choose....

Pm sent in sub frame

Hacksaw both sides of the bolt on the inside of the mounting tabs. The shock should fall out.

Agree 100% but at least it's an option for him.

Check the cost of a new line bore and just replace with larger diameter bearings.

This has to be some of the most ingenious shit I have seen.

Got it. Shot u a pm.

Has your offer gone up?

Bump

Pm sent

The mighty vac works great if you want to pull a vacuum through pulse lines. I use them for jet skis.

Just roll the flange across a grinder to remove it.

That's exactly what mine looks like except I used PVC end caps with the flanges. Identical to those but in plastic. Works like a dream every time

I would hope that you use the regulator knob.

There will always be the idiot who uses his air compressor to pressurize the cases with it set at 90psi.

It takes 10 minutes to build. You can buy the Jerry caps and plugs from home d or lowes. Then get the stainless steel valve stem from any auto parts store. Don't mess around with the tire guage. Just get a small fuel pressure guage and your set. All parts cost no more than 20 bucks.

Pm sent

I will sell you mine for 35 shipped.

Don't mount the stingers with hangers. Bolts right to the subframe. That will give you clearance for the pods. It's all about the angle and length of your pods too.

I have a set of tusk axle extenders for sale. In good shape but used. All studs are good, splines are good. The will add 3 1/2 inches to your stock axle. 60 shipped. Paypal...gifted or you pay fees.

I'm curious how this piece broke.

Come on man. Sit down and take a deep breath. You have asked numerous question and as usual we reply with good info. You then turn around and ask for a site sponsor. What is it that you want? Option 1: ask question and put in the work. Use the info we provide instead of it deterring you from doing your own work. If your not confident in your abilities, use option 2 and have a great day. Option 2: you're lost in the saice. box the motor up an ship it to a sponsor.

Take that piston to top dead center and use it as a piggy bank until you can afford good gas.