Jump to content

georgie

Members
 View Profile  See their activity

  • Posts

    170

  • Joined

  • Last visited

 Content Type 

Everything posted by georgie

  1. georgie
    Works good on my 392 cub. with inframe shearers
  2. georgie
    After how many runs on the 1/4 mile run before it's time for a motor tear down and overhaul? Average runs.
  3. georgie
    we don't know the complete set up of both bike's, you can't take a 4 mil. set up for trailing and go drag race a stock stroke bike set up for drags. Don't under estimate stock stroke bike's set up for drags, they rev out faster
  4. georgie
    love this site. something's always heating up
  5. georgie
  6. georgie

    35 PWK

    georgie replied to rjdgriff's topic in Wanted

    I got 2 brand new 35 pwk's for $ 300 shipped
  7. georgie
    Strictly for drags, get some 39 pwk's and some oof pipes for the 392 cub.
  8. georgie
    If you want to make full use of your motor, you got to lower and extend your swing arm or get a wheely bar.
  9. georgie
    Finally some time slips after a race event. Great job.
  10. georgie
    Jeff is one of the few that would ship outside the United States. As far as Guam in this direction and Germany in the other. So in between porting and boring, answering the phone calls, He also personally mails out all the orders.
  11. georgie
    I haven't had any problems with drag racing a duneable tranny. Running mid 11's with 392 cub on race gas
  12. georgie

    steering dampner

    georgie posted a topic in Wanted

    Looking for new or good condition steering dampner. bolts from engine mounts to steering stem.
  13. georgie
    Here's an idea of how violent a low 5 at the 1/8 mile is.
  14. georgie
    Looks like you have a slipping clutch. You should be able to stretch the gears longer, your front should come up ( even a little ) with that short swing arm you have. Run a lock up with stock springs or heavy duty clutch
  15. georgie
    I've got front set marvin shaw's at 13 in. eye to eye. $ 200 shipped. Send me your email if you want pic's
  16. georgie
    I didn't notice any difference in temperature. I have 2 drag banshee's, one with billet and one with stock plastic, both had same temperature after each run down the 1/4 mile. I changed out the stock water pump later. One less thing to worry about.
  17. georgie
    I use old used stock clutch springs on my lock up.
  18. georgie

    tranny ?

    georgie replied to bluedevshee85's topic in Drag Forum

    Sell that set up and buy a duneable 1-4 5/6 manual tranny from our sponsors. I got mine from FAST racing, holding up good so far.
  19. georgie
    Don't know what took so long but welcome.
  20. georgie
    Check the metal ball inside the cap if it's clean. Just remove the 2 screws under the cap and there it is.
  21. georgie
    Anyone had a problem with Mod quad drag axle sprocket hub and wheel hub fused together with the axle? I was going to change my gearing, Dam hubs were really stuck to the axle. So after a few hammer blows with a rubber mallet it gave way, sanded it smooth and reassembled it. Maybe there was something I was supposed to put in between the hub and axle?
  22. georgie
    What size motor would be competition for a turbo banshee? Awesome run
  23. georgie
    Memories of my first time on a banshee. what a rush
  24. georgie
    Thanks. This is what I wanted to know.
  25. georgie
    Don't you need a horn to make it street legal? I've read of some banshee's on here that are street legal, just wondering if it had a horn.

BHQ Quick Links

×
×
  • Create New...