WantABanshee

yes I have a stock impeller but when it first started happening I took the cover off and rotated the kick starter and it worked fine... This is really killing my Banshee experience..

Yes a 27.5 pilot sorry typo... I have stock head that is square, I checked it before assy. I did not order a headgasket for the new .020 over bore? Could that be my problem? It has 125 compression on both cyl. so it doesn't appear to have a leak. Suggestions?

I only had been riding it for like an hour... I do not run a coolent bottle but not many people do around me... I don't know what it could be.. I know its not the headgasket and wouldn't that be the only way pressure could reach the jackets? Maybe the caps bad like mentioned idk

This is my first banshee and I rebuilt it. After I rebuilt it I would take it out and after awhile it would start puking coolent. I thought that it was the headgasket so I got a genuine yamaha headgasket and put copper spray on it and torqued them down and rechecked them. Today it was 50 degree's so I took the banshee out and all was good. I did a 1-6 gear pull for the first time ever and it puked up coolent again. I'm thinking the only thing that it could be is lean! I've been waiting to do a plug chop until the riding temperature was around were I would be doing most of my riding at. My banshee has T3 toomey's, boyseen reeds and a proflow filter and adaptor. I am running a 29.5 pilot and a 290 main jet in 679 feet elevation. I'm running Engine Ice coolent. any suggestions or ideas??

I didn't see that you had pushrod in there the first time. Sorry. Just looking to pick up a ball. Thanks

fuck that man they cost $1.5 from Jeff.. I just didn't want to pay 6 bucks for shipping and waste his time with a 1 dollar part. The thing would cost 2 bucks to ship at the most

Lost my damn pushrod ball. Anyone got a spare one laying around I don't wanna pay 10 bucks shipping for a pushrod ball. Thanks guys.

Sold!! Thanks Scott

bump for a GREAT set of wheels!! I love mine and looked a long time for them

email sent

06 Take off's from my Banshee... No major grooving or scratches... No bends... Good wheels... I would like $50 plus shipping

^ So is that you or not ahah

pm'd

hahaha I've wondered this same question

muratic acid dissolves the alum. off of the steel cyl. sleeves.. I just did it this weekend! It does a good job but does take awhile but is well worth it.. My cyl. didn't even need bored after I got the alum. off the cyl. walls Good luck.

Why would one want to rough up the crankcase? Someone mentioned seeing some pics of the outside. It might help aid in the sale Leaving out some important details. Chain whip? Any cracks? Any repairs? Crank pin grooving?

bump for the end of the auction

bump for the end of the auction

what does it need? pm me but you have to clean out your messages

clean out your messages and pm me

I wasn't interested until I read you were going to throw in the can of spray paint! haha just kidden man good luck with the sale

wow man thats a fast banshee

14 1/2 from eye to eye

^ The bottom of my shocks look nothing like that. pm sent

Now up on ebay My link