ugottalovewagner

The A-arms on my banshee have a little play in them and I went to check it out. I'm trying to figure out if I need new Sleeves or just the Bushings. I was wondering if anyone knew the measurement that the sleeves and bushings are supposed to be at so I can check and see If i am within tolerance. Thanks for the help.

hey guys, i got this banshee on a trade and just looking to unload it, don't know too much about it, looks to be mostly stock. It is gonna need a seat cover, brake work, and new a-arm bushings. I am gonna fix some of the stuff myself but just decided to put it on here and see if anyone was interested. It has a newer top end according to the previous owner. It starts first kick and runs really good, i took it around the yard a few times, thats it. Has a set of FMF pipes and silencers, also has newer tires than the ones in the picture. The whole bike should be gone through and cleaned up but would make a nice rider for someone. it does have chain whack on the cases as well. just trying to be as honest as possible. Asking $1300 obo. the bike is located in ooltewah, TN willing to trade for a dirtbike, motorcycle or atv of equal value. give me a text or call at 518-929-7653 if you are interested, i can take more pics too, thanks for looking feel free to make an offer, worst i can say is no

the paddles are 21 inch and they are on 8 inch rims

I got a nice set of 12 paddle haulers on douglas blue label rims. They are in good shape, no rips in the paddles, bead to bead buff, roll out is around 71 inches. Also have a set of front smoothies on rims as well. These were on my 450 and they worked really good. Looking for $425 shipped for all 4, $325 for haulers and $100 for fronts, reply on here or text 518-929-7653 im located in cleveland, TN

Bump still looking, got $1500 cash for a built motor

i don't want to insult you but i got $1650 right now, might be able to come up with a little more in a few days, i know its not what your asking but its cash and times are hard right now, let me know thanks jeremy

where are you located, im very interested, send me a pm

I'm looking to buy a complete drag motor, i have a chassis and i want something that i can drop in and go. Dosn't have to be too big but the bigger the better. Looking to spend about $1500 but would go $2000 for the right setup. let me know what you got, i have cash.

kickstart, that appears to be what happened in the past, This motor has been sitting in a box in my garage for a few months and this is the first time i have looked at it. nothing appears to be broken or apart inside the motor now, but at one time it looks like art of the clutch must have broken tonight its all going on ebay, so feel free to make offers on anything

I want $150 plus the ride for the PVL its just the stator and the rotor, i dont have the coils or the CDI that would come with the kit. i can send you pictures cause i finally got the pvl puller tool to get the rotor off.

I havnt been able to get the clutch nut off yet so im not sure what ratio, i havnt really thought about the price, let me get them off and then ill get back to you.

I bought all this stuff to build my first drag racer and have lost interest, now i just want to get rid of it all. Whatever hasn't sold is going on Ebay in a few days so if you want something speak up and make me an offer. I accept paypal, and will give discounts if you buy more than one thing. I can take more pictures of anything or try to answer any questions. Besides what is listed I also have a PVL ignition, RDZ straight cut gears, RDZ 1-5 tranny, and a set of triple ported 68mm cylinders. V force 3 reeds, seem to be in good condition, $150 shipped Wicked Billet Intake with built in crossover 40mm intake should fit up to 34mm carbs, 75 shipped Billet Kick Start Lever, made by Trick Licks $45 shipped Billet Stator Cover with outer bearing support $215 shipped Direct Drive Lockup cover, Lockup, Cascade water pump cover, and cascade billet dipstick. Has a few nicks inside but very usable $250 shipped Pro Taper Fat bars with clamps $60 shipped 2 forward stock width Drag A-Arms, good shape made very solid, comes with arms, tie rods, drag cut spindles, and 2 inch lowering shocks, $350 shipped Chrome +12 roundhouse swingarm good shape has a few scratches where a chain came off at one point, comes with dogbone and a R1 shock that just needs to have one bushing drilled out to fit. $275 Shipped Newer style blaster rear axle that works on banshee as a 2 inch narrower axle. Comes with banshee hubs $100 shipped

Bought a complete motor and got it in the mail yesterday, so im really getting excited to get some more parts now. I also got my front drag hood made and it came out really good. ill post some pictures of it when I get a chance. Now im just looking for some pipes and carbs to go good with the motor. I got the complete motor for $1050 so now im at about $1300 total so far

bump still looking. LEt me know what you got

Thanks ill definatly give them a call. what length of swingarm do you think would be good? I plan to run it with a solid strut. Also what kind of paddles are people running?