WantABanshee

Now on ebay Powerhead

Banshee's vibrate ALOT. Not to insult but are you snugging them down good enough?

hahaha who knows. come one guys i feel like these are very reasonably priced.

ttt

Thanks for the bump!! TTT

Hey man 400 bucks and a running banshee is a deal. As others have stated you def. need to get a carb boot and a K&n filter. Cleaning the carbs would also benefit you cause as others have stated you probably sucked some dirt in there. If catastrophic damage was going to happen my bet would be it already would have. Before you go messing with the idle at least do/fix the boot, filter, and clean the carbs. Good luck man. Any questions were here to help And one of the BHQ rules is, do not listen to this kid. He might trade you pipes though

this is a badass fourwheeler!

how much for the pistons?

ttt

cole i tried to send you a pm as well and it will not work. Yes the prodesign stuff fits my email is birdman94416@hotmail.com email me so we can talk.

Fix it right. Drill it and weld a nut in. I've always got a really long stud that i would hold on to with my welding gloves. Then thread a nut on it so you can hold it in place while you weld the nut. I couldn't imagine drilling through the frame

this takes the pro design domes, studs and o rings

I've got a Paul Turner Powerhead. It has been polished to a mirror finish. It will come with o-rings but are missing a few stud o-rings. Does not include domes. Would cost a good amount of money to get this finish. Asking 120 plus shipping. If it does not sell will go on ebay.

emailed.

Option 1: Trade your stock shocks and $200 bucks Option 2: Pay $289 so that I can then get 200 and buy my own stock shocks. The Ohlins are in good shape. I don't know much about them because they came on a bike that I just bought. The coils have some rock chips on them and where the powder coat chiped there are some rust on the coils. If you do not think this is a responsible trade you should check out some of the prices on ebay!!! I have more pictures of the shocks and if you are interested I can send them to you through your email.

i just beat mine out with a big hammer and a punch the other day. i am reading the thread and wondering how you would cut out the bolt that extends through the swingarm?? Cut what?

Great shape, no cranks, doesn't sag, no stress marks

ttt same thing happened to me how to fix!!??

You got any pics of it done?

I need one 21cc dome or two 22 cc domes. I prefer used. Thanks

ok any one else?

My kicker was really worn out. I bought a kicker rebuild and it worked for while now its back loud as ever. What do you guys do to keep these damn things from rattling?

I have a dome off of my powerhead that took some damage when the thing blew up. It's not horribly beat up but pitted pretty good.. I'm considering sanding it out and running it. All that touches the dome is a compressed air/fuel so it should be a big deal should it? What do you guys think about it?

i have a uncut front that i'd like to sell