Paul M

Spread the word man, lets make this one better than last year .

Your Pm box is full !!

Big bore or small bore?

Last year was off the hook , this year should be even better ! If you do plan on going and you dont have lights, make sure you bring some type of a battery operated head light and tail light ! also bring trash bags!! were not leaving a mess behind!

Mine were CEL some guys run the dgh I would throw some 158s in with the clip in the middle make a short pass and see if it gets better ! what gears are you running ? is this on a hard flat surface or a hill ?

I was running 152 or 155 in my 39 pwks on a cub at sea level

its got to be pretty tight its been awhile since messed with a stock clutch but I had that problem before and I wasnt getting the lock nut tight ! I might have even double nutted it !

are you tightening the lock nut ?

you will probably get them , he is the same guy cutting overides really cheap ! I hate to say it but ... you get what you pay for . and sometimes that includes sevice ! next time call Tim at Stellar ........you will be glad you did .

I live near Pismo and go there quite a bit you camp right in the sand !, Its gunna be tricky with 2 wheel drive but its doable! make sure you check a tide table and try to get there as close to low tide as possible !! very important , as it is easy to drive on the wet hard packed sand, after you pay and drive down the ramp pull over and air down to 10 lbs all 4 tires ! try to select a spot not to far from the ocean but far enough away that so the water dont swamp your camp at high tide . pick a spot a nd get a good run , and it really helps to stop on the hard pack and un load the toys first ! find a nieghbor at a near by camp with abig 4x4 and make a new friend share a few beers and cut a deal with him to help tow u to the hard pack if needed when it time to leave , dont worry there will be lots of peeps willing to help . and as far as the buggy goes I say take it . have fun

found this on fley bay 16 mm 610

I love mine ! Built by Mc coy, its is very reliable and has lots of power and it can run with and beat lots 10s ! but I have also been beat by a few 421s....

It will be one trip you will NEVER forget ! Glamis is the mecca of all offroad, nothing compares . just doit .

Nate McCoy is my choise! but like bada said having your buildr near by is nice when it cones to tuning or dyno work !

still for sale 250 + ship !!!!!!!!!!!!!!!!!!!!!!!!!

After i cut them I use a rasp and a file to even em up it work s really good !

haha at least hes being honest Found On Road Dead Fucked Over Rebuilt Dodge Fix Or Repair Daily

WCR I also have heard a few bad things but my self I have had no problems with them and there trannys work flawless

I got a couple somewhere I will look for em today if u still need one

yep me and manny and some of our crew will be there ! call manny, I am leaving tonite should be somewhere between wash 4 and 11 by day break weds

I know this sounds stupid but I had a loose ground at the tail light and mine did the samething ! check all you connections also I dont like to let a fresh top end idel down to low when you first fire them up ! I like to keep it above idel preety good just to make sure there is plenty of fuel and oil to keep the piston from wanting to stick !!!

Mine is a 72 bore and there is not much left after you have bored the cases , I do know when they go bigger they fill them in with aluminum welding before they bore and yes I filled mine in with epoxy with no issues !!