Darthwall

up

I have a couple sets of stockers with new reeds pay dhipping and 5 bucks they are your PM me

if you were closer I would love to pick up a 250 that nice

when it comes down to crunch time I might drive down there for it I have been looking for a deisel but might sacrifice

bump for a local great deal

If you get the ceramic high heat tape for dragsters it would work I have only tried it on muscle cars and it works great if you get the pre made wraps they have with the shiney outer cover it does work but only for an amount of time I have used it at work on a propane torch that spits out about 150 gallons a day. it works for a while but use the header wrap that doesnt look preaty and you wrap it good couple of layers

sell your pipes on here and get some gradons off of ebay and you will come out nice and clean

ya I got that stuff make an offer one headlight needs a bulb but besides that all in good shape

here is a couple pics http://img530.imageshack.us/img530/8685/img8862.jpg http://img39.imageshack.us/img39/5659/banshee031.jpg http://img505.imageshack.us/img505/8821/banshee028.jpg http://img35.imageshack.us/img35/5816/banshee026.jpg if you need more just let me know

you might want to throw out some offers I need a powder coated frame with title drag lightened is good if not thats cool if they dont go in a couple of weeks they are going on the next MX bike I build

I will take them off your hands if you get the cylinder studs out without striping any threads out

up

just like it says I went and tried to take my cylinder case studs out today and well there is nothin like trying to take 13 year old studs out of an aluminum block got 2 out of 8 out the rest broke off so that shit sucks what do you have

location and post up some pics for that price im supprised its not sold allready

got a chain still need a brake line

just thought I would see if anyone has these before I go and order new ones what do ya got

if it comes down to it I want the 12 paddles and the 1-5 trans 1st dibs

come on man give the guy a break I thought the same thing that prolly means 65mm pistons or 35mm carbs one or the other

Ok so they are up for trades I am looking for the above items shearer pipes 22" 12 paddle extremes shaw shocks maybe a set of drag A arms 1-5 dunable overide some trades I will consider compensation for parts these are in great shape no dents/dings rear silencer has a aftermarket mount for the silencer alot stronger than factory send PM for pics and info

lol ya did'nt catch that one

hit up bakersfieldturbo he was looking to trade some oof's for some inframes

this is very true its not cheap at all I started out with just rebuilding my stock 350 and going down the list of things to do just decided to do the 4mill and do small things now as of the point of rebuild I have over 6K into the quad not considering the price I bought it for its addictive I wanted some thing small and fast but the way its going now I am looking at a full drag shee on methanol be careful

did you have that one cut or did you find it for sale somewhere my example is just what I made out in your pic and it makes alot of sence

it looks like it would'nt be to hard to make just get a piece of aluminum probably 1"x1" by maybe 2" drill the center out on one side about 1 3/4" get some bungs to thread in and on the end put a valve to connect to the purge tank so when the purge tank is not hooked up you shut the valve from your pump or pingle then the fuel goes straight through the lines

great guy to deal with bought a duel pingle valve off of him it was in new condition and got here fast highly recomended guy to deal with