ban99
-
Posts
738 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by ban99
-
the a-arms are chromed and the tie rods are powder coated gloss black
-
-
Still working some of the details out on the new ones but should be pretty close to the older syle of $120 pc $145 chromed. price includes shipping.
-
If you do a search on it you will find all the info and pictures you could ever want on this subject. Not trying to be un-helpfull but this topic has been covered multiple times. Welcome to the HQ btw
-
Thanks for the props bro. here's a pic of one I'v been working on that's a little different and one of the older styles.
-
I have a decent stock one, $75 shipped
-
I would just loosen up the pre-load a little bit.
-
here is one option http://cgi.ebay.com/ebaymotors/yamaha-bans...sQ5fAccessories
-
Any Cheap roundhouse style Swingarms out there
ban99 replied to Emmerrrrr's topic in General Banshee Discussion
I paid $420 for a +3 chrome swinger with carrier, included shipping. http://podosracing.com/main.html -
go with a roundhouse carrier, you will get more adjustment and a whole lot less headaches.
-
-
If you have a current ohv sticker from your home state with corresponding registration you are ok. You only need to buy a temp. cal. ohv sticker if you do not have one from your home state. No joke with what Lowbuck said, the rangers don't mess around down there. especially with glass, helmets and flags.
-
wd-40. or a heat gun. pull a corner up and hit it with the heat gun and see if that works (carefull not to melt your plastic). If you end up just pulling off the top layer then use the wd-40 to take the glue residue off.
-
:yelrotflmao: :yelrotflmao: :yelrotflmao:
-
says it's a nine inch spring, so measure your stock one with no pre-load on it. I'm guessing they are the same. You could also call the manufacturer and get there spec sheet.
-
They also have a 250lb. rated spring for sale. Hope this helps. http://cgi.ebay.com/ebaymotors/Custom-Axis...p4506.m20.l1116
-
Just as MistBanshee said, only I have found that it sometimes takes several times of heating it up and letting it cool down to get the white marks out. Don't know what it is about the blue plastics but they are by far the worst for showing stress marks.
-
Check out Jd's custom grills on this site. The guy does some really nice work. I do believe he will make up a custom grill if you have an idea in mind.
-
there is an electrical sensor attached to you e-brake that occasionally gets stuck or if your e-brake is on . Give it a wiggle and see if that works. It's all interconnected with the tors system which in most oppinions should be removed.
-
two ball pein hammers, hit the side of the spindal from oposite directions at the same time. This should cause it to drop right out.
-
I bet that thing would smoke most banshee's
-
F.A.S.T. Racing CLOSED TILL FEB. 17TH
ban99 replied to FASTOYS's topic in General Banshee Discussion
Man you have your whole life to work. Jamey was sayin you were worried that you wouldn't be able to hang with the big dawgs and that you might make up some excuse about having to work. lol. -
Tire Advice, did i use correct punctuation?
ban99 replied to 97stageIVBansh's topic in General Banshee Discussion
buy a gun and box of ammo from cabelas then go hold the tire store up. Problem solved. -
I had mine done about a year ago. They did the frame, 4 hubs, and a few other small parts for $200 including the sand blasting. Make some calls around your area you might be surprised what you can get it done for, especially the way the economy is right now. I wouldn't pay more than $250 for a frame with the blasting.
-
Here's one I did not too long ago Like Loco said, you want to cut behind the shock mount. I added some 1/4 plate on the outside and 1x2 boxed steel on the inside. Hope this helps.