RadarRacing

Jeff at fast packages a kit with those type fibers,steels and springs for about $100 and it'll hold and work for you. Theres people selling them on ebay for $95 too but I'd just get one from FAST.

You'rs are a much higher $ set of shocks the resis cost more (prob a few hundred$). Mine are dune editions or no res. I think I read one time that elka sold the same length as banshee for the blaster they might be the same length not lower. You might call em and see.

I have one of those too. I havent tried it yet but they are used to lower your bike. Flat trackers use em a lot. I'm trying to get my dune bike down a bit.

That's a decent price and bottom of the barrel elkas work kickass. I have the dune editions on my bike and choppy dunes are nothing rough at all. Get em you'll like em.

Yes they'll work but they'll be lower. I'd trade them for my banshee elkas if you want the banshee's longer length depending on the condition. I want mine a little lower.

Eton, DRR, Suzuki or polaris 2 stroke to mod for cheap and it'll run faster than you'd want your kid to ride. Honda if you have the dough and want it to last forever. One of the Etons I built for Airforce1's boy whipped raptors,yfz's and piped banshees quite often. Eton 90 drag bike.

I'm gonna pull mine off my dune bike if interested. It's setup for a +8 arm and 200 lb rider right now. I'll take $500 for it. Dont remember what model it is it's a remote resi stock link type for an extended swinger, over $1,000 new. I am gonna put it on ebay when I get it off the bike and i think it'll bring $500 or more.

Hey CFM do you do arms in chromemoly? It should cost a little more I know. Do you have a site we can order from. I'm sending a pm too since this post is a little old.

Still interested in the Vforce reedcages. No price yet? If the price is right I'll take em.

Thanks for the PM, I dont really wanna split em up thought it was back and fronts. Let me know if you wanna just sell em.

I have a nice set of elkas I might work a trade with you on. They're nearly new but the rear is setup for a stock linkage type swingarm +8 over long and a 225 lb rider. Fronts are no res dune editions and the rear is a res. This was a high $ set of shocks. Let me know if interested still. I know a buyer for your front shocks if you wanna shoot me a price on them if they're for sale maybe.

Interested in the reedcages. Only 4 posts so far wow. Hard to sell stuff. Let me know how much you want for them.

Got some 20cc BB domes for a 68mm bore or cub.

ATF IS what you wanna use not oil. Did you use old springs maybe. Maybe need 3 or even 6 of the stiffer ones and good fibers like from the streetbike or just use one of Jeff's kits they're good over your bikes HP range. I've got a 400 cub and with 3 of the stiff springs and 3 stockers mine holds.

My topend is good now. I just need to hook up now and learn to ride LOL. I didnt wanna blow it the first weekend out. I should sell the cpis and get some shearers but theyre pretty new and shiney gonna use em for a while.Might be down thanksgiving weekend if we're not huntin birds.

Why didnt you have those when i needed a set? I mighta tried them when we were at LS if you'd had them with you.Shoulda told me. Good luck with the sale.

It helps quite a bit. Get a plate not a key.

Cubs are a pain too. Just make sure the rings are lined up with the pins and you should be able to get them in the cyl with your fingers.

Turn two head nuts together till they are really tight and use a wrench to turn the lower one till the stud come loose. Might have to spray WD 40 or something on the studs and let it sit for a while if needed.

I'd say with an aggressive port you will. But if it wanst for that or if he's a lot lighter then the raptor. They run good but so does a decent banshee.

Where in Mo.I'd like to see it.

They have their uses if you ride in rocky areas,pavement to get to dunes they seem to last forever. They dont accelerate well at all but turn well. For drraggin I'd never want them. We still own 2 sets for my kids bikes but theirs much better tires out there than geckos. They suck for performance bad but are a tough tire for riding and lasting.

A 4 mil 69 bore would be a 433.46 cc motor so maybe it is a 69 bore.

When we bought our "1/2 ton towable" 27' Toyhauler 7500 lbs.. I had an 01 1/2 ton Dodge 4x4 with a 5.9 magnum (360 cid) motor and on slight grades my truck had a hell of a time pulling it empty even. My truck was rated for it but it made my trans temp light come on and it got 4 mpg. One toyhauler that you could pull and is a kickass setup is. This http://www.cheyennecampingcenter.com/C18DFWP_value.html . I got the http://www.cheyennecampingcenter.com/C27DFWP_value.html and it was heavy for my 1/2 ton truck. I got a 07 Chevy Duramax Diesel Crew now no probs.

It may be a 5 mil crank. Trinity and I think Vitos has them. A 5 mil in a 69 is a 441.24 cc and a 68 would be a 428.54 I'd bet they are using a 4 mil cub cyl and a 5 not a 4 mil crank for whatever reason?