Banshee Chad

Thanks guys, ill keep the cpis till I can get some porting.

Ok, was thinking too, with the cpi I could Proly get a good low/mid port and theyd do well?

So currently I have a pretty stock 06. Cpi inframes, k&n on proflow plate and no air box lid. Tors removed, running a 270 main, and needle 1 clip towards blunt from middle. Skid plates and 13 tooth front sprocket, but that's all mods. I 80% of the time dune, occasionally take it camping and ride big roads, and rarely do trail riding. Question is, should I try to get some pt mids instead? I like the cpi, but I hardly ever get over 4th gear, usually dune in 2nd and 3rd. So I'm just wondering if the pt mids would be a better all around pipe? I do plan on getting port when top end needs rebuild. But I think I got a while.

That's the crappy part about sand, its every where and only takes 1 grain to cause probs.. I like to blow my shit off with air compressor before I take anything carbs related off..

Get that factory one off eBay? Someone photocopy a real one and sold it to you.

That's a lot of oil....

I don't use any, faster without it....

There was a thread where a guy took some that looked horrible and made em look good. Think he wet sanded and a few other steps. Find that thread and Ull be good to go. I think they were red.

Zip tie the filters together, should keep them from bouncing over to the bolts.

Not sure how gasket material would do, but silicone works great.

Talking cool head or pro flow filter adapter? If air filter adapter I gobbed silicon on there too!

Ya, I used the silicon chain stuff, but wd seems to repel water and dirt/sand better. Never used chain wax tho. And yes, with swinger on stand I spin wheels and spray rear sprocket, then I spray front sprocket and rollers all good. Also I spray all suspension and moving parts, but my bike does a lot more sitting than rippin.

Spray it with wd after every ride. That's what I do, still got stock chain on the 06 I bought new.

To replace rear shock?

I think my next set will be carlisle 489s.

Floats stuck? Or not adjusted correctly?

Switch in throttle housing, related to Tors.

If the front didnt have all that exposed frame, it wouldnt look too bad. Somehow lower that hood/light assembly to cover frame? I wouldnt ride it tho.

Ya, but im not sure exactly how. Im understanding u have to remove from cdi, but not sure? Might try just unplugging it from harness?

15 will fit

Get a T.M. Design works one. Looks to be the most protective. Easy install, and I feel good itle work if needed.

U a pimp, or governor, or somerhing?

Sell it to me for $20?

Parking brake rev limiter on left bar. Its a normally closed switch.

I used mine when my plug vibrated out. Its not ur garage of tools, but it works in a pinch.