Matt96shee

SOLD

So....my wife and I are sick and tired of being in debt. We're selling just about anything that's not bolted down. I don't want to do it! I put a lot of time, money, and knuckle skin into building my RZshee...but, it's gotta be done! The story, it's a '96. I bought it on Ebag as "completely rebuilt"...of course, he meant I needed to completely rebuilt it! The original motor had the crank seal in backwards, the swing arm had a piece of thread rod for the mounting bolt...just a bunch of shit like that. So, I went through it all and got it completely ridable. Then, not being able to leave well enough alone, I got the whiff of doing and RZ conversion. The motor is all RZ, meaning RZ trans too. The jugs are 1mm over and have had some port work done on the intake side. The bore has maybe 20 hours of riding and the trans has had the oil changed twice. I put a FAST clutch and basket in it. Other parts include VF3 reeds, PT High Revs (black), and FMF silencers. I put a Cascade 2into1 and 35mm PWK on too(your thumb will thank you!!!) I think it has a wider than stock axle but I'm not 100%, if someone will send me the stock dimension I'll go measure it. I JUST put new 20" Holeshots on the rear. 14-41 gearing, new rear sprocket and chain. The rims are powdercoated, not painted. The plastics looked like crap when I got it so I painted them with truckbed coating since, at the time, I mostly road in the woods. I'd rather BE fast than look fast. The Blaster is a '91 I believe. I traded my brother for it...my wife learned to ride on it. It's all stock and the motor has been rebuilt. I'd like to sell these as a package for $3000....or, since this is a Banshee board, $2500 for the Banshee. I think $3K is a good price for 2 quads! I'm in Phoenix (Queen Creek) and would be willing to deliver these to the Vegas/LA/Albuquerque/El Paso radius for gas money. The 'shee: The Blaster: Small bonus, women's size 9 boots and a medium helmet go with the Blaster.

do you have one with a title?

how much for the cdi/stator/flywheel???

hey man, are you selling the stator and flywheel? any other electronics??? thanks, matt

i RZ-ed mine...love it!

can i get some pics? mattoliver426@hotmail.com

which side seems fat?

well...not to be the debbie downer but i just sold a complete package, minus cdi, on ebag and only got 250 out of it.

they make a single carb for banshee's???

c'mon man, update the story!!!!! how did you get the 2nd one back??????

where you located?

clutch cover shipped to 45132???

I'm out here in Portland for a few months and it's killing me that I won't be able to hit the dunes! I'm thinking about shipping my quad out from Ohio. Has anybody ever shipped a complete one? How much? With what company? How did you have to package it? Thanks! Matt

1) pipes/silencers 2) clutch cover 3) a arms or complete front end 4) frame 5) front and rear plastic i'm in hillsboro and can pick up.

can you shoot me a price on the rockets? thanks, matt

I put on some new Holeshots and found out just how bad my current chain and sprockets are!! So, school me up on chains. I see X-ring, O-ring, cheap, expensive....yada yada yada. Since I don't really feel like wrapping a chain around my ankle I'll spend what I need to for a good one. I think I want to go with stock gearing, 14/41 (I'm at 13 on the front now). Although I'm considering 15t front. Do I have to add links if I do that? Thanks for the help!

hey man, could you quote a shipping price to 97124? do you normally greyhound frames?

No better than you can spell, I'm not suprised you couldn't get it to run right.

how much do you want for it?

cascade sells one too....that's about the going rate for a new setup. if you watch ebay you can get one for around 300 to 350, maybe less if you're lucky. my carb is a pwk 35mm...which i think is about the norm too.

i didn't think you were supposed to mix and match case halves???

how much for the rockets and silencers? and the black fullbores?

hey man, a piston holder for what purpose? i've had 2 top ends apart and back together and never had to use anything other than my hands to hold things in place. is it to keep the crank in place while you're sliding the jugs on? in any case, if you've done dirtbike topends you'll be fine. not sure about the other thing...sorry. matt

F.A.S.T racing's clutch and basket are very nice and no where near $800. I'm running the setup on mine and love it. if you're on a budget, why not look for a good used crank, hone your jugs, and get new rings? if that kit you priced is for a hotrods stroker crank and jugs that are already set up to match it then i don't think it's too bad of a deal....actually, it sounds a little low.