seabass

That's what I figured, just bugging out a little over my freshly ported cylinders. Thanks for the reply, makes me feel better. :beer:

You have some riding spots? I'm close and down for a ride.

I was doing some wheelies in some soft sand and dumped it backwards. This is the first time sand was actually jammed in the silencer. I'm assuming it all blew out as I was riding but should I remove the pipe and double check that there's no sand in the pipe? I wouldn't think sand would go backwards into the cylinders while riding in a straight line but if I wheelie again with some sand in the pipes, could it travel into the cylinders? I'd rather be safe than sorry, that's why I'm asking. Thanks for any replies.

If they don't sell locally, please put me first in line on the nerfs. Thanks.

Interested in the nerfs, kill switch and plastics. Please post pics. Thanks.

Grew up in Assonet.

Closer than you think. :ninja: What's up man? Great site you've found here. Welcome. :beer:

Thanks for the pics. I'm going to pass. Bump for you though. :beer:

Damn! Were you running it with no tire LOL!! I've seen some F'ed up rims in my time but that one takes the cake.

I think he's joking, he has to be joking, right???

Interested also. PM sent.

Price?

Bump

Probably answering my own question, because I doubt it will. I'm meeting up with someone parting out a Raptor and he has a PD shifter. Just need a QUICK answer! Does it fit a Banshee? Thanks in advance.

I'll try to find the excact name and site, probablly tuesday. I have things to do tomorrow and I'm logging off the computer right now. PM me to remind me to get you the info. As far as street riding around here, bring money for bail and to get your bike out of impoundment. Also, plan on a few trips down to go to court. Anyway, PM me as a reminder and I'd be glad to get the info.

So, are you looking to ride track?? If so, there's a place in Lakeville, Mass. Probably about an hour and a half from you. They have alot of riding on Sundays. If that's what your looking for, I'll try and find the excact info. for you.

Good point also Loco. Lighter than my friends Razrs that I tried out. Buy some used rims off here and sell your 10's.

I LOVE my Kenda Gnarly 6-ply rears. They hook up great, never had a puncture,reasonably priced and are wearing great. When I ordered my fronts, I did alot of research and they didn't have the 6-ply Gnarly fronts yet. They said the front 4-ply Klaws where run in a dessert rally and held up great. WELL, I ordered them. Nobody, including who I ordered them from, mentioned the side walls are only 2-ply. These are the worst front tires I've ever owned in my life. They have more punctures then a pin cushion and they're atleast 95% tread. I'm going to stud them and use them on the ice this winter. I don't know about the rears but the fronts are garbage for trails. Like I said, the rear Gnarlys are great. Just my opinion.

Pack the habachi, ice fishing gear, throw on the ice studs and go fishing. :beer:

:yelrotflmao:

Does the kicker rattle?

Starting to look for some front shocks. Stock A-arms, I mostly ride trails, woods, etc. I'm 210 pounds. I'll consider all brands. Thanks.

Looking for billet cover. Please PM me if you have anything. Thanks.

Ting, Ting,Ting, Ting,BRAAAAAAAAAAPPPPPPPPPPPPPPPP!!!!!!!!!!!!!!!!!!!!! Welcome back, what took you so long? :beer:

I'll check it out. Thanks for the advice.