400ccStroker_shee

how much for a +4 any pics?

My brother just bought fmf fatties K&N and we are cutting the airbox off completely tors removal kit also on it, I think the jetting will be around 310 main 27.5 pilot and don't know on the needle and air fuel screw, let me know guys thanks. Oh yeah some carbon fiber reeds but that wont make a big difference, no porting stock carbs, probably going to mix oil 32:1 castor 927, and half 110 octane gas and half 91. Thanks in advance chris

we're going out friday night and I don't know where we're going to camp yet my pops is coming and he'll pick the spot. That sounds cool. Where would you suggest camping.

I wish man I'm having surguery on the 14th so my last weekend of riding is this next weekend at glamis, I have a broken scaphoid in my right wrist, they didn't cast it because I'm having surguery so I'm just dealing with the pain and on vicodin!! It sucks but one more weekend of riding is worth the pain!!!! Good luck in dumont

I have fatties and love them, My shee is all modded out and I have an aggressive dune port and the quad runs extremely well with the fatties, I'm sure I'm losing a little top end power with them but I still have good bottom end and it pulls hard up top. I think the fatties will respond better to porting then the toomey tr6's will.

I know this is suppose to be in the wanted forum, but I thought I would get more hits in here, thanks

I'm looking for a nice set of skat track haulers... The size I want is 21x11x8, 8 paddle haulers. Thanks chris

I'm looking for a nice set of skat track haulers... The size I want is 21x11x8, 8 paddle haulers. Thanks chris

how much do u want for them?

Where in TJ? I might have to take one of my homies that speak spanish right?

try calling the people at sweetquads.com they say 399, but i got mine for 350 when i called.

I was wondering where there was a place in san diego or close by that does chroming for a good price? Thanks for all the help.

i've had a 200 watt rs for awhile now and no issues i guess i'm one of the lucky ones that hasnt had a problem.

i use a lone star +4 with 21x12x8 8 paddle haulers and my mods are aggressive dune port, timing advanced 6 hinson clutch components with fzr fibers, coolhead with20cc domes. I think you need some haulers on some 8 inch rims because 10 is a lot heavier. For your mods you listed i think 8 paddles will do because like stated above the more paddles you have the more it kills the top end speed, unless you have the motor to pull with all those paddles. hope this helps some.

that sucks because i'm going to be out to sea on the 24th of feb or else i would go. I'm going to go to glamis on the first weekend in feb and then the 2nd weekend of feb i'm going with my pops out to dumont. i don't care where i ride either dumnt or glamis as long as i'm in the sand!!!!! Got Sand?

I know Jeff at F.A.S.T said he can't get shearers for at least a couple of months. I saw some shearers on ebay too. I just think it all depends on who you call to see if they have any.

make sure the carbs are sync'd

i'll ask my brother if he wants it when he gets back, also i have a guy from another forum web site that might want you 34 pj's, pro design intake with boost bottle, pods, i think he said 400 or 450 can remember. i look tonight. let me know how much you want for all the stuff and i ll let hm know!!!!

yeah I'm really thinking about what pipes to get because my little bro might buy my fmf's for his new shee. i was thinking about the cpi's shearers, and someone was telling me about grand river racing pipes, which i don't know anything about the grr pipes.

Hi guys I would like to know what pipes would work best for my mods.I'm running stock cylinders that have been bored 66mm and have been ported for a 4mm stroker crank .The crank is a hot rods 4mm 5mm long rod ,the pistons are wiseco pro lites ,reeds v force 3s ,vito's hemi head 24cc domes ,ricky stator 4+ timing advance,vito's water impeller,34mm mikuni carbs 390 mains 30 pilots clip in the 3rd position, tors removed,I 'm running 110 race gas 32:1,I 've been running pro curcuits.I want to run in frames if that makes a differance.I would like to know my hp but there 's not a dyno around so if someone could get me close I would appriciate it,I 'm thinking around 65 or so.Thanks for the help man27 The guy is saying he has a 4mm stroker crank and cylinders are 66mm with some porting. As for the 24cc domes, I've never heard of anyone using that size and getting 170 psi for there compression, but if thats what you're getting for your compression check its good your using race fuel. I don't know how to quote what he wrote sorry

thats a good price i wish i lived closer!

yeah your bad, you can't be beat by anyone with your stock cylinders and you want 6500 for your banshee what a ripp off!!!! Who cares if you can beat my stock bore stock stroke banshee big deal! Keep talkin shit though!!! To the guys selling the cpi's i wasn't trying to be a dick head i didn't know new cpi's sold for 550 i thought they were close to the same cost of the shearers which can be picked up for 450 plus shipping!

20 shipped

how much do you want? I'm interested if not sold