Andy P in WA

Anyone here running the T-5's with just the plain steel finish? If so have you noticed any problems? Do they seem to want to rust up or anything like that? I have to admit, I was looking to go cheap with 2 sets but don't want them deteriorating on me faster than they should!!! Thanks to all

Only about 300 ft. I think on my other bike I am running either 300, 310, or 320. i don't remember for sure. I actually just found out that power brokerz will sell the toomey banshee needles seperately for $25 ea. Still a bit steep but if it is better.....

Quick question for those who may know. I am looking at putting t-5's on 2 banshees also will be removing air box and going to K&N pods. I allready have one bike set up this way. My question is about the jet kit that comes with T-5 pipes. I know they call it the "The Toomey Perfect Jet" kit but I believe it is a Dynojet kit. The only part of the kit I really will "need" is the needles. The 270 and 280 mains are too small for this application where I live, obviously won't need the airbox vents or the uni filter they send with. Is it completely necessary to use their needles and buy the whole kit just to get those couple pieces or is it possible to run the stock needles with different mains, clip position, etc... I guess it really doesn't require that much money to do so. I just hate paying them for something I don't even need!!! I have called and asked Dynojet about purchasing needles only but they will not do that, of course they wouldn't be able to charge me for all the needless crap and colect a little more. Thanks in advance to all who keep the HQ rollin'

http://www.dfn.com/benkaren/jetfaq.html I thought this was great information and helped alot.

Thanks, I picked up jets from 300 to 340 also got set of 27.5 pilots. Gonna start with 320's, maybe 330's just to be safe, and go from there. Only problem with WOT testing Is I don't know of many places where I can get out and actually get through all the gears at WOT. But I will find a way. Are there any tricks to WOT testing where you don't necessarily have to ride the bike through the gears. Like blocking up rear and dragging the brakes to give resistance. Thanks again

PLEASE Dont slaughter me for the monotony :laugh: Any who, serviced bike on saturday and pissed about the amount of sand getting past my Pro Design foam filter so I am going to try the K&N Pods. Just was wondering how much this change may affect my jetting I am sure I will probably have to go bigger correct. Any input on how much bigger. Maybe 300? Here are current stats T5 Pipes VForce 3's 280 Mains 4th groove on needle #25 pilot 1.5 turns out Currently Pro Design Kit in box with air vents and no snorkle As Always Thanks to all

I should be in the Astoria area from July 26th thru August 5th. Are there any good place to ride near that area? I know Florence and Winchester are south a ways but anything closer? Thanks to all

QUICKSAND's are on the way!!!!!! Gary is sending me a sample of the powdercoating in yellow to see how it looks against the 2006 special ed. yamaha yellow. If that doesn't look very well will be going black or the matte silver/aluminum? anyway same color as frame. Also ordered the Elka Piggy Backs with comp. adj. should see them in a week or two. Roost isn't Beverly where the kid died earlier this year? As farr as meeting up at Juniper, anytime just give a hollar. I have been working a lot so I have to prepare a little. Thanks to all

RoostRocket I am located in the Dri Shitties, "Tri-Cities". I do most of my riding at Juniper and Moses Lake. I did talk with Gary on the phone yesterday and he sounded like a great guy and even provided extra information on some questions about the shocks and other things. I think I will end up going with the quicksands and some elkas up front and eventually the elka link in the rear. It also appears that Gary has a lot of happy customers here at the HQ. I have got the Special Edition 2006 in the yellow and black so I am trying to figure out if I want to go with black, yellow, or the frame color for them. Any pics or opinions on color???

Not wanting to start a war but, I am in the process of trying to decide which A-arms to go with. Partly Desire, because of the Banshee's poor stock setup, and partly necessity, because I have tweaked both of my stock uppers jumping a little to much. I have come accross Lone Stars sport and rec arms for about $450 and the Quicksands for about $550. Does anyone have any comparisons between the two? I am interested in their durability, guarantee and or warranty. I ride mostly dunes and desert trails. I love flying off of the peaks and smashing the woops. If anyone can provide me a little help here I would greatly appreciate it. And yes I have done a search here........ :laugh: Thanks

Finally got them installed and after tweeking a neddle "Thats another Post and story of its own." and getting another one in (should have ordered an entire jet kit for what it costs to order one needle). I must say there were no disappointments once I got to ride them. As far as wheelies go definately not a problem except for maybe the slow rollers in first gear. I guess I will just have to ride them faster!!!!!!!!!!! I still need to get out and do the WOT test but everything seems great, the sum bitch rips now as compared to stock. It is almost hard to believe pipes can make such a big difference. I may try the T6's on my other shee since I don't plan on any major porting or anything like that,,,,,, to soon anyways. Next I think will be the V3 reeds and Fullflight +2 +1 A-Arms with Elkas and maybe the Elka rear link and shock. When I figure out how I will have to post a pic sometime. Thanks to all the great peeps here for the SUPPORT a newbee needs. :beer:

Thanks to all. I decided to wait until i could get another ordered in. Hopefully I can order just the needles from Toomey or Dyno Jet Co. Does anyone know any other place they might be found? Other than that the installation went great. Also have a question for WOT test, can you do it with the bike on a stand or do you need the resistance of the ground to the drive train of the bike to get an accurate reading. Where I ride there are not any spaces I can think I would have enough distance to get WIDE OPEN in 6th gear before cutting engine. But if I could hang the ass end in the air from a forklift or stand maybe even apply a little light pressure to the rear brake to increase resistance on the drive train....... Let me know....... Thanks to all

As previously mentioned I am putting new T5's on my SHEE today. While rejetting I dropped a slide and needle assembly tweeking the new needle. It is a dyno jet kit that comes with the T5 pipes. Can the stock needles be used or do I need to, and would it be best to wait until I Can get another needle from toomey or Dyno Jet Corp.? Many Thanks

Got them Friday will be installing Saturday hopefully with no problems if so I will be looking you guys up.

THEY ARE ON THE WAY!!!!!!!!!!!!!!!!!!!!!!! Ordered them first thing Wednesday morning!