Jump to content

Bansh-eman

Members
  • Posts

    8,477
  • Joined

  • Last visited

Everything posted by Bansh-eman

  1. i have the locknut but not the tool. i gave it to a buddy that needed it
  2. New Front Marvin Shaw Comps 14 1/2 Eye to Eye. Comes with spacers ready to bolt up. $315 shipped. paypal [email protected]
  3. Ok these are brand new, never even mounted on a bike yet. Got them and decided I want to go with a differant setup. $450 Shipped... Upper 48 States only!!! Paypal [email protected]
  4. Send bk_banshee a pm, he dose killer chroming! I had him chrome ALOT of stuff for me, and all of it was top notch! He offers aluminum chrome for all those parts that is a pain to continuously polish to keep them looking top notch
  5. if your talking about the reed not saling against the cage that is normal. they do not make a perfect seal.
  6. yes water cn be sucked through them, it's your call if you want to ride through them but i wouldnt. Unless you saturate them they probly will repel most of the water as soon as it hits them, but i wouldnt think about taking that chance.
  7. if you find your coil went bad i have one off a running 2000 for sale. $40 shipped
  8. Used RPM Dominator axle. Spacers have been chromed and Castle nuts have been polished and clear zinc covered. Axle is from 0 to +4 all splines are 100% condition, perfectly straight axle. Axle has a lifetime warranty. $250 Shipped, If you wish to use paypal add fees Used Lone Star Axle Locknut. Perfect condition $40 Shipped, If you wish to use paypal add fees Selling my billet intake ran it with my 35's. $110 shipped, If you wish to use paypal add fees
  9. unless your riding where there is little to no air flow, and its really freakin hot, there should be no need for an oversized rad. the stocker with a billet impeller and water wetter or engine ice will be more then enough. There is a common misconecption that the colder your motor rus the better. this is false. every motor has an optimum heat range to produce the maximum power. too hot or too cold and you will loose power.
  10. i ran 21cc domes on my mild ported stock bore 4mil and had like 150 psi at sea level. 87 octane or your 91 is what most people run in thier daily drivers, but when we run "pump gas" its premium or 93 octane your 98
  11. www.mininova.org there is group of guys that always have top quality downloads. one goes by the name djfred. do a search for his name. all his movies are top notch. and all his buddies have the same quality he does.
  12. I am still lost at what your saying.
  13. on a 2 stroke there is no oil that goes into your crank case. The oil is for your tranny and clutch. When you drain the oil thats the only place oil come from. The crank case in a two stroe is where the A/F mixture goes in at and the goes up through the transfers to the topend. So any metal from your pistons can not make it into your tranny ( where the oil you drain is at) without a big hole being punched through the metal.
  14. Rico it depends on your porting. Nate has dyno runs that show BB pipes make more hp for his porting. But other builders will tell u they port for SB. They both have thier pros and cons. Ask who ever your having port your motor what his port runs best with
  15. if i had time and more importantly the motivation, I would compile a whole list of How To's to be pinned
  16. you can use either a packing like toomey or fmf sells or you can go to home depot and buy corning insulation and remove the paper and use it. Depending on what kind of pipes you have you either un-screw or drill the rivots and remove thje canister. pull out the old packing. wrap the new packing around the whole perferated core. get some masking tape and wrap it nice and tight arund the wrap to hold it in place. do not wrap the tape to overlap. wrap it nice and spread open but make it tight to the core, if that makes sense. then replace the core with new packing and screw the can back to the pipe.
  17. +6 Chrome QuickSand Swinger. Only been in the sand 1 time. Has a very small spot that the chrome flaked after I bought it. Thing is SOLID! Very good dune swinger. I spent 750 for this thing and only rode it one time. 400 Plus shipping and Paypal fees
  18. i am actually thinking about selling ym lights if i can get my other stuff to sell. I will be sending my frmae to tim to get chopped and lightened.so i will have no need for them then, but i have to wait until my other stuff sales so i can pay for it.
  19. Selling swinger for 400 plus shipping and paypal fees. Swinger does not come with carrier. Need to sell asap!
×
×
  • Create New...