Bansh-eman

it donest matter which side they go one as long as they will reach the plugs, but they fit best with the plug wires pointing towards the stator side.

it all depends on the type of riding you do. topend or bottom end? theres more then one type of carb for every motor. its all about what your trying to get out of the motor.

i didnt see pipes in your sig but im assuming you got them. you should be around 150-155 main, 45-55 pilot, CEL needle 4th clip, air screw 2.5 turns that will get you very close. depending on the temp you will have to adjust a little.

yea i got it on pc. i wanted to get it on ps3 so i could play it on my big screen in 1080p but i have to 20 gig so i dont have wifi and i didnt really want to drag a cable all the way across my house. i might see if i can find someone locally to use thiers and see how it looks. if its much differant i might grab it. but i just really dont like the idea of playing on a joystick rather then mouse / keyboard

if you take I-15 towards Vegas, turn north at 127 towards Baker. then its like 35 miles down that road. you make a right at the dumont sign follow the dirt road past the river bed and its right there the new prices for Dumont is bullshit! they charge more for less riding!

yea i dont need all of that, everythign else is brand new but like a tard i gave mine away with my old swinger.... i can get a brand new one for like 35 bucks. but i figured someone else has one for cheaper that will work

send the better of the two my way if u dont mind... let me know what shipping cost and ill paypal it to u.. Greg Collinsworth 3191 Salmon St San Diego Ca 92124

iv been playing on a server called pimp my skill... i get alot of point there casue theres alot of 4 and 5 stars to kill

depending on your porting and other mods you could be over carbing it and losing power.

the guy that posted above u, or u might try rockymountainatv and try using the codes everyone has been posting.

like the title says, i need the insert that goes into the pivot tube of the swinger. let me know what you got

i think they just barley started making floats for the banshee but i have ridden them on a 450 and they are VERY nice shocks!

you want the delron type bushings. they should be very hard not rubbery. id get intouch with him and get my money back

the long rod reduces the angle that your motor fires at making less stress on the rods bearings and crank and what not. nothing for power, simply to increase reliability

Reeds. They will go well with any motor built or not, where as carbs will not. You need to have the right carb for the motor. To big or too small and you will hurt the performance

alot of guys use corning insulation. i usually just buy the fmf pink packing that looks like strings.

i have quite abit more to get all that, im only at like lvl 27 or so... i think i hit lt 2 but i cant remember. i dont realyl play it alot cause my kid but when i do i rank up farly fast. i find that free for all (cant remember the map name) give a shit ton of points

id like to know too... i know you can buy chrome paint but it doesnt ever fully dry.

someone do me a favor and repost using imageshack i cant see photobucket on gov computers

im not sure if it depends on the year, but iv seen stocker with and without. some have tons of clatter and wont grab and other have nothing wrong.

oh nice i think i might have to order one of those... ill just get a peice of velcro and strap it down a little more so i dont lose it in the dunes...

i carry a garmin but i just toss it in my backpack. if you find a mount let me know id like to have it on my bars rather then my backpack.

on stock pates they have the tiny notch on the plates and that what your referring to. for aftermarket plates they are the same so you just stack them up

the hotrods bearing is fine for the other side. if your rebuilding a stocker either go TZ or maxload.

over kill you can carry two primarys right? or is it just sniper and another rifle?