ohiobanshee

Give Jeff at FAST a call. Great builder and a super person to deal with.

Way to go. :thumbsup:

I use it in everything from my weedeater,chainsaw,lawnmower to the shee. Works great.

Jeff at FAST had them. :thumbsup:

I have a 98, black & red,new holeshot tires,shaved head trail ported,dmc 916's or fmf fattie pipes,ceet gripper seat cover,new clutches,gaskets & seals,trinity 2into1 with 34pj or stock carbs, dg front bumper. $2500 obo. eric

Looks awsome, can't wait to see it done. :thumbsup:

You have a pm. :thumbsup:

Spoken like one

The springs help center the shift forks on overrides.

I got my 1-4 duneable from w-c-r,he said any override can jump into gear without waring when the bike is reved up. He also recomends netrul down be done to stop this.

I don't have any parts, but I do need a set of 21or22cc domes. How much?

10 While changing a flat tire alongside the road someone pulls up and askes "Did you have a flat". No, I rotate my tires every 3000 miles nomatter where the f*$k I'm at.

Must be the exhaust gearing change that makes it so powerful. :laugh:

WSM makes a piston in that bore with the right pin height and banshee crown.

Bansh-eman is a great person to deal with. Part was shipped fast and in great shape. :thumbsup: His followup to make sure I was satisfied was amaizing, most sellers just want your money and dont care if the buyer is happy.

Just the other day I forgot to put the clip on the masterlink. :: Broke the case,had to tig it.

You have a pm. :thumbsup:

Pulled a allnighter to get the shee ready to go ridding today. Started out with a frame and engine, assembled the whole bike, got done at 4 in the morning. Went to the ridding area today, rode the shee about a 100 feet, felt a jerk and it quit pulling. Looked down and the chain was off, than the tranny oil started pouring out, busted the bottom case. Looked at the chain, forgot to put the clip on the master link. :: Think I will go to bed now.

Your jetted to rich if you have oil running out of your pipes. Pull the carb apart and check what size your main,and pilot jet is, also what needle and what the clip position is.Post it up and somebody will help.

I am going to build a new 4mill,already contacted jeff,for next year.6months ahead of time no rush. :thumbsup:

Learn something new everyday.

What the hell is a v arm? I have heard of a arms,j arms,and d arms but not v arms.

Look at a set of cubs,they have WB engraved into them. Anybody know who that stands for? eric

Go to planetasphault they have the rules posted. :thumbsup:

The older banshees 87,88 had 13,40 gearing on a 4bolt rear hub.