375hp banshees

Where dud you hear that Claude, new as of?

I'll let you know...never broke a chain & hope I don't but... i got the bigger sprocket one

Hmm clip must be all the way down in the bottom groove? Where are your air screws @ Sent from my SM-A505U using Tapatalk

pop the bowls of the ones you took off & see . Are the other carbs complete or you kept same slides/ needles? Make sure filters aren't over oiled & Delete one of your threads , its gonna get confusing

What jets , filter, elevation Define bogs, falls on it's face, blubbers/ spits n spudders...

Looks good ( i like the flying tips tho) What was your brake lever fix... did you put it in the IG post, for future reference ? Sent from my SM-A505U using Tapatalk

That's really a personal / budget decision. wiseco forged pistons will be a definite longevity upgrade but 99% you'll need it bored..., ..., ... first. Have you ran it yet? Can you read the numbers on top of the piston? Sent from my SM-A505U using Tapatalk

I just got the one for a bigger sprocket, I wonder if there not as effective, with a small sprocket, on a big sprocket style saver? Sent from my SM-A505U using Tapatalk

Dont recall one if there is it'd be metal & no Bueno...Everybodys running drw now it seams Sent from my SM-A505U using Tapatalk

Delete kit come with cable? Do 1 carb at a time or make sure you don't mix up bowls & slides. shave down the end of the boss a little, you will be drilling, for idle screw holes, or it might not hit the slides enough to get a desired idle rpm. Put choke tube back on before firing it up. Look at piston #'s while you have the reeds out. iirc, some reeds require boot modifications to fit. Inspect boots for dry rot & do a leakdown test before running for piece of mind & intake gaskets tend to leak.

Not mine, so cant get better pic's but i copied this, to do mine by Sent from my SM-A505U using Tapatalk

He's canadian...idon't think he understood the question;-) Envoyé de mon SM-N975W en utilisant Tapatalk

^^ this! And do you know any good banshee forums, that you can post them on?

Ive been happy with kevins port work, but he seems high on parts prices & he's had some questionable quality dealings...can't go wrong with f.a.s.t. tho Sent from my SM-A505U using Tapatalk

What translator do you use claude, that's a keeper... i can't find fucktard in french I found : putain de retardée= skeeter But if you say putain de tardé your either really late or you're a slow fuq Both of which... skeet aint

I kept my oem T & ran from there

Cleaned & put back together, or all new...you think stuck plates was the problem? Sent from my SM-A505U using Tapatalk

🦨Or he, skeeter & Pepé Le Pew were playing hide da rodents again ... and it just came 🦨out Sent from my SM-A505U using Tapatalk

Pm ayesully810 Sent from my SM-A505U using Tapatalk

Yes SKEETER we know Sent from my SM-A505U using Tapatalk

attention, attention! évidemment il sait aussi toucher les enfants (& skeeter) en deux langues aussi !!! Sent from my SM-A505U using the goat/ skeeter & lil' boys touching app

pour l'amour de Dieu il est français pas québécois, ne le traitez pas comme Claudia ... ça pourrait être faisable, est-ce que ça aura l'air bien est une autre question Envoyé de mon SM-N975W en utilisant claudias goattalk