grpark20

Thanks for the comments! I put lock tite on the sprocket nuts. Think it will stay? The bike scheme is going to be red and black. Red fullbores and elkas all around with +2+1 arms and +4 swinger, and black rims. Engine is going to be 4 mil long rod, dune port to match, 795 series pistons, cut domes, and PWK 33's. Dune only. I could man handle the stock set up with all stock suspension and all the bolt ons in sig. Only issue was the bike beating the $h*t out of me. Going with a dirt bike for trails. This is the first and last build. Nickel and dimming parts is killing me!! Hope to be finish by May 09!! More like a hope and a dream!

Spacers in ? are circled.

Brake Side

Sprocket side

Well, as you all know the directions that come with the G-Force axle suck! I used every part except 1 spacer. It was listed for Blasters only. This was my firsy axle install so please take a look at the pics and let me know if it looks right. I compared it to others that had pics when I used the search, but I just want to be 100%. Also, this was my first time installing the round housing carrier....so my question on that is did any one else need to use spacers for the rear brake caliper bolts and the brake stay braket? Take a look at the pics and you'll see what I'm talking about. Don't pay any attention to the poor mans shocks!! Thanks in advance.

I don't know if it is CFM or not...I think it may be. I got it off EBAY from the place in Concord, NC. It will be a while before I actually get the chain on... It looks lined up though, but thats just looks. It was too good of a deal to pass up. $139 for the chromoly round tubing with round carrier and gussets in +4.

Glad to here its on correctly! Tooke me an hour to get the swingarm on fooling around with the caps and seals. Hopefully someone will chime in about the rollers.

This is my first time doing a frame up build and this is the first problem I've had so far. Hopefully it's not a problem. I just need to know if I have the chain guide installed onto the swingarm correctly? I can't think of any other way it would go but want to be sure. Also the chain roller kit has a big roller and a small roller. Which roller goes on the top and which roller goes on the bottom? Thanks in advance!

The question is will long travel shocks (17.5 inches eye to eye) work with normal +2 +1 a-arms? Would I be able to get the shocks set up for my style, weight, etc. for this condition? I only ask because I can get this for a steal. But a steal is only a steal if you need it and if it works!

Long story short....I have 1 warped front rim and need another. I'm looking for a stock aluminum/ aluminum colored front rim in good shape. Not bent, warped, broke, etc. I need a price for this shipped via USPS to 98387. I have cash in hand and paypal account. Thanks in advance. George

SOLD!!...Check your PM's

Does the hush kit have the spark arrester built in also? If so I'll take it.

Need a price on a toomey hush kit shipped to 98387? Let me know!! Thanks George

Hush kit still for sale?

If its still for sale how about $100 shipped to 98387? Let me know! George

Just like it says. I need a pingel valve. Send me a price shipped to 98387. Thanks!

No one wants them, so going to EBAY.

No problem. Still for sale if anyone wants them.

No problem. I'll wait it out for you. Just keep me informed.

Still for sale....Never heard from Flash and Flare

Send the $100 via pay pal to [email protected] I will also need the shipping address and I'll get them out ASAP. Thanks....George

These fenders came off my 2005 shee. I went to race cut and don't need these. There are no torn or streched holes, NOT RACE CUT, and have minor stress marks. The fender brackets are included. I might have the bolts, not sure at this time, but can let you know before you buy if you want the fenders. I'm asking $100 shipped to anywhere in the lower 48 states. If you need more pics or have any questions e-mail me at [email protected] or call 253-495-2169 and ask for George.

Going to EBAY if there are no more takers!

Coolant bottle, relocation bracket, and hoses sold to1BAD04SHEE.

The lights are still available.