grpark20

Must be nice to have to $$$$ to do all that at once. Sounds like it wil be a fun ride when you get it back!! :thumbsup: :thumbsup:

Red Bull size cans are a good fit. Just cut the top off and you can cover the nut on the bottom too.

WOW!! That looks good. Guess there are no indents for the rears. Only rivets. Thanks for the pics!!

Aren't the labels indented in to the plastic and riveted? If not, then I can put any sticker over them and remove them and drill out the rivets. If they are indented in the plastice then I need the same size sticker or you'll be able to see the outline of the indent. Either way, I'd like to know the size of the warning labels if anyone has measured them. Thanks!!

I know I'm an idiot for posting in wrong forum. But was considering getting the team hard atv stickers on EBAY, just need to know the size of warning labels so it doesn't look too retarded when I cover them!

I'm not with my shee right now and was hoping someone could tell me the size of the warning labels on the rear fenders? Thanks in advance!!

Well put....

I'm definately going to take my time. It's just a comfort factor for me to do the mods one at a time and then a test ride or two. I'd hate to have some kind of weird problem and then have to research all the mods to find out what caused it. All in all, thanks for the advice and letting me pick your brain. I'll let you know how it turns out. About 100hrs of riding after this mod is finish, going to get some port work from F.A.S.T. and an aftermarket crank. So should be a fun ride. :biggrin:

Thanks for the info. I plan on running straight race gas. Hopefully I'll be at a minimum of 165psi in each cylinder. I'm goingto do those mods one at a time so if something is out of whack I'll know which mod to concentrate on. With that theory of do a mod then a test run, its going to take 2 days to get her dialed in.... :: Thanks for the advice though.

Hey guys!! Before I even start I am going to do a plug chop, just curious. Right now all I have is T-5's, K&N filter, 27.5 pilots, and 340 mains with stock carbs at sea level. I have the pro flow adapter with the K&N filter, but I cut off all the airbox around the filter so there is nothing restricting the airflow. I am going to K&N pods, so do you think I'm going to have to rejet? I am thinking yes to the rejet, but at the same time I am going to be adding VF3's, +4 timing, Noss head with 20cc domes, lightened flywheel, and billet impeller. My thought process was that the VF3's will make the difference in added fuel to the added air. So am I way out in left field or what? Also going to run straight race gas and do plug chops and compression checks before I go all out riding. Thanks in advance.

First off there Bansh-eman, the person that questioned my integrity about the stickers thought I was going to flat out wing it. Which I'm not. That person and I already clarified that issue. Thankyou jbooker82. Then you jumped in and just agreed. Why jump on the band wagon? This wasn't even concerning you. Second, so what if you built a computer or anything else in Iraq. When I do get time to use the phone I prefer to talk to my family not figure out what ALBA says they can send me. And to clarify even more.....My wife is in Iraq too, no one at home to get mail....so I'm trying to get some stickers from someone I can trust rather than relying on ALBA to make it happen. From the post I read, I'd have to stay on top of them make sure all parts were included. Quite frankly I'll trust a HQ member more than a company. Don't want to buy the kit, not get the stickers and find out a year or so later I didn't get the stickers. Third.... You have no clue which branch of the military I'm in, much less where in Iraq I am.... So tell me how do you know what accomadations I have available to me?? That is unless you've been to everyplace in Iraq with every branch of the military. You make it seem like every branch and every place the same. Being that this is getting on a personal level...If you have any more personal comments you'd like to make... please send them to me in a personal message. No use in all the other members here getting sucked in to this act of stupidity.

To the response about me wanting a duplicate sticker.... I already have screens in and I don't have any problems. The sticker would be extra insurance. Besides if I did have any problems I would take the fall and pay the fine. I do want to buy the kit from ALBA, but if you LOOK CLOSER at my post you will see that I am currently deployed in Iraq. And the kit isn't on their website. So you tell me how I am supposed to call ALBA and sit on the phone and wait while their is a war going on and then much less make sure I get the stickers when I get home a year later???

If anyone could duplicate those stickers, it would be greatly appreciateed and I would pay. The park rangerss aren't that bad here in WA state but every little bit helps. I would get them duplicated my self but I'm curently deployed in Iraq. So kind of hard. Great posts too. Thanks for info.

Ok, decided to go with cool head!! Now what brand and what size domes??

How much should I get the head shaved? Also Would a cool head be better? What about reeds and cages??

Hello there Banshee experts. I'm not in to the game as heavy as some of you hp maniacs, but I do need some adavice on my next mod. So far all I have is T-5's, K&N pods, stock carbs, 350 main, 27.5 pilot. My shee runs great for sea level and normal 50 degrees. So I need to know what mod will give me the most gain. I prefer bolt on because I am a do it yourself person and don't want to ship motor across country to get work done. Money really doesn't matter, just rather spend a day bolting up than $1000 for some one elses work. So any advice would be helpfull. Thanks in advance!!

I need a set of stock rear rims. Don't care about dents or dings as long as they roll straight-ish. Let me know how much shipped to 98387!!

Does anyone have pods for stock carbs. If so pm or e-mail. [email protected]

Exactly what it says. I need a set of tire rod ends. If you got them, how much shipped to 98373?

Give me the paypal account info and I'll send the money ASAP. Thanks!! My address is George Parker 2608 S Meridian St Apt# 1211 Puyallup, WA 98373

I snapped a tire rod, anyone got some to get rid of? If so how much shipped to 98373??

Thanks for the info

Does anyone have anything to say about this?? Don't want to break anything!!

I am getting ready to switch from regular anti-freeze to engine ice. Is there any kind of special way to get all of the anti-freeze out of the system. I was told that you cannot mix the engine ice with anything. So any info would help. Thanks