Snopczynski

If your running ethylene glycol antifreeze it will corrode away the metal and rubber parts in your cooling system. I run maxima coolanol in my rig and dont have any problems with it. Maxima Coolanol Link

what carb is on it?

So what are you unhappy with from the Dyno then?

Terry cable

thats 42.6:1 40:1 would be 6.4 ounces to a 2 gallon.

YES

you didn't have the front fender/radiator brackets then?

The right side plug fouling leads me to believe a seal, but you still haven't told me how many ounces.

I dont get it. The sides should have 2 ears you mount to?????

you would be definitely safe with a 20cc, but you can make it with about 160-165 psi compression. Usually thats borderline 19cc domes at sea level with .040" squish clearance.

We already run 4mm stroked bikes and a 6mm with cubs on a 2 into 1 and it does very well. I would not recommend a set off stock bored 27mm round slides over a 2 into 1 intake on my worst drunk day. The problem here is they are building street bike engines and you own an ATV! Yeah, you do!

Thats kind of low compression for an 18cc dome, what is your elevation? How about your dome squish?

The 2 into 1 intake will work with a set of cubs. Your gonna need like a 38mm carb though. The 4 mill stroker will make the bike have a very good bottom end power increase that will pick up across the rpm range a bit too.

let me ask this, are both plugs fouling? How many ounces of oil are you putting into a 5 gallon can of gas?

19cc will be borderline for 50/50 race gas. Its gonna depend on your bore size and squish. Put the 19cc domes in check squish and compression and then report back.

race gas turns plugs red, its normal.

call electrex and see if they will rewind your stock stator.

Whats your dome squish? What type of riding?

He was asking about one for a Raptor 700.

Whats done to your motor, what size bore is it?

Do you know if there is a parking lot there or if your allowed to camp in your trailer there?

yeah, it may actually be low then. Where is your squish at?

The T5 will gain on the bottom over stock pipes, but its not really a bottom end pipe. Its more of a mid-top pipe. I dont really like fattys all that much, if I was to run a fmf pipe, I would find some gold series pipes. I dont run vf3's, but people I talk to and ride with say they make a little difference. I usually stick with the stock cage and run carbon tech reed petals.

Put on hid's, they only draw about 2.9 amps per light. Thats about the same as 1 35watt light.

I recommend a head. What compression tester do you have?