2twin350s

That bike looks freeakin awesome man.Great work on it. :thumbsup: And to answer the first post,Yes I can get you new foam.In most cases for 65-75 shipped.Check out my website.I own www.cosmicquads.com Thanks guys!

This is bad for the transmission.I have split severeal trans down becuase they were popping out of 2nd and third gears.When you do not use the clutch it puts too much load on the shifting forks and slams the gears together and this will grind up your shift forks and woller out the engagement cogs on the trans gears.When that happens shifting forks usually run around 30 bucks each and your trans gears run around 75 bucks each.Multiply those numbers by 3-4 pieces and walla.You just ruined around 5-600 bucks worth of parts.Just my 2 cents.I would be more concerned with why a blaster is beating your banshee.Do you have good tires? OR are they just spinning?Is your machine running well?

We speacilize in custom one off seat covers and are a dealer for aftermarket and oem parts. www.cosmicquads.com

I kept this one from a parts bike.It must be the old style stator.Any more input on those types,or should I just dump it and go back to stock?

yes it has a factory plug that plugs right into the harness.but there is one extra white wire that you are supposed to tie into the regulator circuit and add a second regulator.I since have just gone back to one regulator and no change.at idle the lights are soo dim.when riding at nite if i have the rpms low on the bike i cant see a thing. when coasting down trails i have to keep revving the bike to see the trail.we all know the stock lights are not the best,but now they are 50 percent worse than stock.the only time they light correctly is when you are in the powerband,by that time you are over riding your view.

Thanks for the advice guys.All those Items have been checked.I have other regulators and swapped them.The gap on the pickup coil is 19 thousanths.So that is good.From what I understood the pickup coil is just for spark.I did not know it was used for lighting.just thought I might have to run the ricky flywheel also.Dont the ricky flywheels have astronger magnet in them to match the 200 watt stator?Is that why the lights are dim?Guess I will just dump my stock stator back in.I do a lot of nite rides.Thanks

I just put a ricky staor 200 watt stator in my 96 shee and I was told to wire in a second voltage regulator.So I did.My problem Is now Is that the lights are friggen dim as hell at idle like a cigarette lighter, and do not brighten up until about 4000 rpm.The lights are stock the flywheel is stock,and I disconnected the second regulator and no change.I never had this problem before.Do I need the matching flywheel to fix this problem?OH and there are no wiring problems or loose grounds.Been there checked that.The lights were fine on my stock stator,and when i put this one in they suck now.HElP Anyone?

just blow it out with a air compressor and blow gun

Bought some covers from me. Paid very fast and had great communication. Recommended! Thanks again.

Which one? The one that says "screw U"? :laugh: If you really like it...pm me :wink:

You can also wet sand. Takes some time, but here is a link for step by step instructions. http://www.3wheelerworldforums.com/showthread.php?t=24247

Request sent. I will ship them out asap. Thanks :beer:

$45.00 shipped, Priority mail, for a plain wave cover. If you wanted something custom added, it would be a few bucks more. The colors are: Red, Purple, Black, Yellow, White, Blue, Turquoise, Navy Blue, Magenta, Gold, Orange, Burgundy, and Green.

what kind of seat cover are you looking for? Plain or custom?

Those are pretty cool. You have a price on these kits? My wife loves that Red Bull stuff. She will want a set for her shee. How about Miller High Life kits? :biggrin:

yes, we could do that. You can pm me with the design details, or visit my website. :beer:

Yes we do, thanks scooter. I have plain black in stock. You can visit my web site, or pm me if you want a set.

PM sent to you. 23champ, If you are searching the net for "coffin tuck" you will not find anything. That pic is a velvet with the designs pressed in (cool seat in pic BTW). Coffin tuck, is just that. The skirting they add in the coffin. It is a "tuck". This can be done with any fabric really...satin, velvet, etc. Hope I helped you there..... If you wanted something like that pic, you will want to look for velvet. The closest thing to "coffin tuck" would be wave velvet. Here a pic of what that looks like.....

Cascade does do nice covers, but I have done a lot of seats that already have a Cascade cover on it. Their seams are soooo thick, that they actually dent your factory foam and ruin it forever. At $120 for a "custom" seat cover from them, that 10 other people will have, I don't consider that custom. We do seats one off to the customers preference, for a few dollars more installed, for what just a cover from them cost. For example...this red and black R seat, was carved out of Banshee foam (softer) to the 86 250r trike design, retaining factory lines. Custom cover made, installed, with matching fork boot covers, rear shock cover, for less than 2 bills shipped. Plus, who will you find to write "Fuck 4 Strokes"? I'll tell ya who, www.cosmicquads.com

you guys need to check this place out.total custom one-off seatcovers.get something no-one else has. www.cosmicquads.com

try clicking here.www.cosmicquads.comWe can make you covers for your lights.22 bucks shipped

i have 2 brand new sets. 1 is spoken for.so at this time i have 1 kit for sale

i have a brand new un opened set. i will sell them for 85 shipped.they are discountinued.send me your seat, and i will make you a matching cover and install it on the seat for a 100 dollars. so for 185 total i can get you the graphics and seat cover. i also have a set of raptor 660 bud light graphics too.

i am posting my shee up for sale.it has been a great bike. i have owned it snce 2001.my friend bought it brand new in 97 as a leftover year. it is a 96.i have 95 plastic on it now.he put only 50 hours on the bike.i have put around 200 hours on it. here goes. 20 over top end namura power pistons head shaved 20 thous. has 130 psi compression mild woods and trail port work done stock carbs,tors removed idle kits installed 240 main jets motofast 2-into 1 pipe stainless steel(the stronger kind) kn filter with sealed plate in the airbox.stator cover always kept sealed and no water has ever touched the stator. has ricky stator high output stator.stock flywheel and timing 2 voltage regulators installed to handle the high output stator. boyeson power reeds,stock cages. dirt digger clutch.new stock basket pro-design water pump and in line cooler. chassis parts= stock frame not bent. never rolled has durablue heavy duty axle new yfz 450 front tires mud machine rears 90 percent tread left all brakes are newer. i always kept the slides lubed and moving free.i always flushed mt brake fluid once a year to keep the systems clean.stainless steel braided front brake lines. full aluminum body skid plates including a- arms new a-arm bushings. new steering bearing.billet tie rods all shocks are stock and good.no leaks new nylon swinger bushings 12 tooth front sprocket. led taillight in the rear flames painted on tank plastic and a mod quad flame grill i am sure i am fogetting some stuff. it is on stock crank. this bike has been perfectly maintained and i cant explain how i kept up on maintenance. if something clicked or looked like it needed replaced,it got done. i never let anything go till it broke.if there was a question, i replaced it. all brakes are ebc fa84r gold pads. this is one of the sickest trail banshees you will find.it is completely setup for trailriding and hillclimbing.it was always ridden on trails. i never raced it. this thing has gobs of low-end torque.this is not the fastest banshee you will find.it is purely setup for trail riding. you see what it is and what is done.i can track this bike down to the dealer 5 miles from me.it has clean vin and engine numbers.i am taking reasonable offers over 3000 dollars.this bike must be picked up in ohio. i can meet anywhere around the akron, cleveland,canton areas to arrange pickup.this bike has always had maxima 927 oil and premium fule run and oil was changed every 10 hours of use.nothing is broken or stripped. i will consider a partial trade for anice 350x or 85-86 atc 250r.i have lost interest in the quads and i need money more than anything.but i will consider one of these trikes for a partial trade. plaes dont ask me to part it out.i wont. it is too good of a machine for parting out. it has never left me broke down.the cdi went out one time and i replaced it.please, only contact me if you are ready to buy this.thanks and here are some pics.oh by the way.the painted tank plastic is not in these pics.there is also a custom made 12 pack beer cooler mounted on the back for those long rides.if you need more pics p.m. me or give me your email and i can get them to you

BigCP is very good buyer. He ordered a custom seat off me. Paid right away and was a pleasure to work with. Would do business with anytime! Thanks again Chris..enjoy!