Shee-Male

Anybody got one they want to sell? Pm if so Thanx

there are plastic ones on ebay pretty cheap, that what I run, works just fine and its easier to trim if you run a huge front sproket

same thing, you wouldn't set up a jug in a bore stand for .020, you just hone it all out. It's a better Idea to do all your porting and then have the jugs honed to their finished size.

1:45am???? a little dark don't ya think? That just sucks

From my experiance (with my boxers) it has to be done when they are pups, that way as they grow and build calcium it will keep the ears up. If you crop them now they prolly won't stay up and just look stupid, for the last boxer we didn't crop his ears, no more popsicle sticks and super sticky tape and all that shit...way less work, and the dog is much happier!

make one. If you have access to a tig welder I have a template.

Maybee Honda CR style

where are those? I might have to make a trip east, sounds like alot of riders out there

You should have kicked up a fuss when you picked it up, taking it home and paying the bill means you have accepted the work and payed for it, if they had done work that was not on the work order then you should not have paid it. Now that its at another shop the dealership can wash their hands of it because whatever damage that was incured at the dealership can be blamed on the new shop. You could go to a lawyer and have a fancy letter written up and see if you can get some money back but it will prolly cost more. Personally the Banshee engine is so simple that I wouldn't pay anyone to work on it, I would only pay for machine work and assemble the rest myself. There is plenty of info on this site as you well know. Chalk it up to experiance

I've always said the HQ should have a "how to section" and this would be a great addition. Nice job so far Bigred!

the clutch should engauge after the two arrows line up. 2 Quarts of oil for 18$?, what the hell are you buyin?

Just what I was going to say, and wait until you see the baby pushing from inside, thats weird but not gross.

If you use factory antifreeze from an Acura dealer it is already blue and is excellent for banshee engines since the cooleant was designed for an all aluminum engines with a steel shim style head gasket

Nice addition to an already killer lookin ride!

Is that what people refer to as a "suicide jockey"?

Living in Canada, I've come accross this all the time. The cheapest is USPS but if its something of value I never trust them they lose & damage stuff all the time and depending on what it is it sometimes get hung up at the border. If you do ship it USPS ship it as a gift that way the reciver woun't have to pay tax or duty on it. But do insure it or send it express post so you can track it and make sure it arrives, good for both parties. I personally use UPS for all my ebay stuff and have had great success, especsialy with there tracing system that you can track daily on the web.Aanything under 20.00 declared value is tax/duty free and dose not require a broker, if you take it to the UPS store all you have to do is fill out your address and the recivers adress and they do the rest for you, remember the package is only insured for the declared value and only for loss, they will only insure it for damage if they package it, but if the package has a high declared value it will cost alot in brokerage and taxes. I bought a set of a arms and shocks from MIAMIRIDER and asked himm to make the value under 100.00 and instead he made it 500.00 and it cost me another 102.00 when they got here....dumbass!....

I deffinatley recomend the +2 +1's you can also invert your stock rims for more width, you will have to move the valve stem though. Front shocks are a must, and you can have the rear revalved pretty cheap and it works real nice. Wider axel or spacers for the rear is also a good idea. Don't forget about things like nerf bars and a good skid plate for trail riding.

+4 - +5 is also safe for pump gas, depending on jetting and elevation

I've run stock with no prob's, even with bored carbs, seem to have lots of adjustability.

I'm a machinist at an engine machine shop. We built this bad boy right here, went 6.40's in a 2100 lb car. I enjoy working on the mill and lathe the most and makin all sorts of custom goodies for my friends and I

From Oshawa Ontario, here.

What a boost bottle dose do well is waste space and make the things around it exceedingly difficult to work on. Pitch it and be thankful no one saw you with it

Hope the guy will still walk in time. That suks!

How much shipping to Ontario Canada L1H5L2 for the tie rods. Thanx, PM me