MDS2106

PM sent

What about bracing the wheelie bar between the top and bottom rails,and attaching it to the carrier and the grab bar so when the wheelie bar is attached, the rear end becomes rigid and uses the bracing as a strut.Any imput ??????

Damn 6th gear how far are yall running?

Take one steel and one fiber plate drill a couple of holes thru them and bolt them together.

Walmart does carry a few in automotive.

John, nice to see you have cleaned youself up and bought a new red suit :yelrotflmao: :yelrotflmao:

As the drag racing has shifted some toward dirt lately,it has come time to build as wheelie bar for my son's banshee.He has always done fine with the front end coming up with sand drags,because its generally a floating gradually wheelie that is easily corrected or rode out.The dirt drags with the 4 snows sends the front up quickly,so I want to build a wheelie bar that i can attach and remove when needed.The bike still has stock suspension,I was wanting to know where the best place to mount the wheelie bar since it has a back shock.Someone had told me to mount it to the carrier and the grabbar bolts. Seems like that could cause problems when the backend squats.Also the aftermarket swingarm has no skid plate brackets. Also any pics. would help Thanks Mark

Get yourself one of these.They work great!!!! http://www.rockymountainatv.com/productDet...odFamilyId=8891

I would have stayed with the benoil, maybe not 24-1 mixture but definately the benoil....

i have seen that little blaster in action at sicily island it definately kicks ass....

The penny is so soft you will cut it in half before you break at tooth.Thats the way we have always done it and you will have no problem.You will still need either some type of tool or you can screw an old clutch fiber and metal together.It is easiest to just use an impact to unscrew it,but be warned if you use an impact to reinstall the nut it is easy to strip out...

Is that the little drag blaster from cp customs?

Thats bad ass

What about installing a hitch and pulling the trailer behind the camper?I have seen people pull boats behind their camper .

Its hard to beat TS racing prices on the K&N knock offs.[s&B filters] and the prices on outerwares are very reasonable http://www.tsracing.com/store/Directory.cfm?DID=7

UP

I would try it,if you dont like it you can always go back to where it was before .That 1/2 inch will make alot of difference.

How can that adjust the ride height? :shrug: It will not raise the bike at all. The extended swingarm takes away some of the stiffness of the spring and adding a little more tension to the spring it gives some back.

Have a set of 19cc domes will fit pro design or noss cool head $40.00 shipped

L.R.E. racing or Scotts atv, both are in the Laf. area and both put out some really fast bikes........................................

What part of Louisiana?

Did you try adding tension to the rear spring?When I added my +4 swingarm,I tightened up on the tension all the way and it helped out alot.I am no little dude either!

Just be sure to have a good set of snap ring plyers or you will catch hell.I run my boys bike without the packing and it sounds bad ass!!!!!!

Heres a little vid from the clash http://www.youtube.com/watch?v=QEGgUOVLZeo

Well the" barbie banshee" took home the money so that ought to say somethimg.