BigRed350x

I might have to come down there and meet up with you some time to check out the bikes you've modded up. I might have to hire you to help me out with this. I was figuring around there for all the stupid little crap I would end up needing. cables, metal for mounting fabrication, beer... I was looking at that frame today (without the engine in it) and it has a shit-ton of room that you could stuff a shee engine in with. The mounting tabs for the 450 engine don't look like they would be too hard to match up for a banshee engine. pipe routing is my biggest fear at this point. Once I build the shee engine I want in there, mounting tabs and pipes will be the biggest problem. I will take some pics of the frame tongiht to post on here for people who haven't seen the 450 naked yet.

No problem, we will help skew the vote a little...

Looking for a complete Banshee Engine. Prefer 00 and later if possible. Going to put cubs on, so top end condition I don't care about. I also need the wiring harness with everything (cdi, coil, voltage regulator, etc) Going to start a project late october / november hopefully. Just looking for whats out there.

I picked up the tore apart engine from the dealer today. (they tore it down to find all the problems.) There is WAY too much crap in that little engine for me to try and fix myself. I can tell you right now it definitely needs a cylinder, piston, cam chain, and crank. Probably other stuff. I can tell just by looking at that stuff it is screwed to the point I don't want to mess with it. I was considering the 502cc bore/stroker kit as well. I like the banshee engine simplicity and power a lot more though. Right now I am leaning towards putting the banshee engine in that frame. I probably won't get started on anything until the end of October at the soonest. I need to save some money up for whatever I do decide to do with it. Loco... I am leaning towards putting the banshee engine in there. It will take me a little time to gather up all the parts & everything I will need to do it though. I probably won't have the money I will need for a project like this until October or November some time. I want to have everything together before I starting trying to put anything in that rolling chassis. I want to have a complete shee engine built with all the stuff on the side I will need, ready to go. Right now I am on the lookout for a Good late 90's banshee engine, I plan on getting a set of ported cubs with a 4mm crank, noss head, carbs, and CPI or Rocket pipes, some kind of heavy duty clutch, and all the other typical goodies. If I am going to do this, I want the thing to want to take off if I put wings on it. I will keep in touch on the progress of my parts gathering. I have a lot of stuff I need to pay off before I undertake this project (fix trans in my truck, pay off student loans, monthly rent, pay off credit bills, etc) Should only take me a month or two to get everything paid off with my new job. After that I will be saving and shopping for parts for this project. Any suggestions on particular parts I should try and get?

bout time you finished up

I think Jesus would have SHUT THE FUCK UP back in his day. Go write a bible or something. It is ridiculous to post shit that long. Just put a link to whatever bible-hugging hippie site you got that all from, and if you actually sat there and typed it all yourself, you are retarded.

ROFL

I bet that festiva pulling the trailer gets like 50mpg easily. lol He probably has a 454 in there.

Shiiiit, i will kill ALL you bitches!

i love how stclark just totally changed the post. good job. it is on its way to being a good thread now. maybe x86 has been doing what is in his avatar, then gets on the HQ

I have a tail light off a 99 warrior, would that work for you?

wow dude, chill out a little. I'm not going to turn around and say go fuck yourself, because that would be gay. I would just suggest you learn how to use the search function better. There are about 15 different threads I found doing a quick search that said exactly what you were looking for. It's people like you that are making this board turn into another bluetraxx. You can get your point across just as well without excessive vulgarity. Yes, I use it too, but you are being a little excessive. Chill out a little and I will buy you a beer.

The banshee is already DC, that's what comes out of your stator, wouldn't run too well on AC. you are just adding a battery to the mix.

haha, i bought a $20 tent from wal-mart and built my own trailer for my toys.

That is a performance mod... duh

He rode without a helmet too many times

ROFL

Ha Ha, didn't notice that. He probably rolled it, fucked it all up and is trying to sell it since he can't afford to get it fixed.

That would be friggen awesome if you could build it for me. Besides my welding aint so great so it would probably fall apart the first time I jumped it. I am in Wyoming, south-east corner. I will keep you updated with what happens with it.

Here's the auction... http://cgi.ebay.com/ebaymotors/ws/eBayISAP...Q%3AUS%3A1&rd=1 I sent him a message saying that he had a lot of shit misspelled on there, and was inquiring about his stage 5 port job since I have never seen or heard of anyone who has a "stage 5" port job. Yeah, they might be out there, I was just asking about it. He sent me this... "everything is correct" so I sent him this... "Everything is not correct. You cannot spell. First of all, I would not buy a banshee from someone that can't even spell the names of the parts that are on it, you might consider that... tummy is spelled Toomey boddle is spelled Bottle Ajustable is spelled Adjustable Timming is spelled Timing sproket is spelled sprocket and just so you know... a banshee does not have heads, it has a single head. It is a nice looking bike, and good luck selling it. I would check my spelling next time before posting something. Have a nice day." Just thought I would pass on this dumbass from ebay. If you get a chance you too should go point out how bad his spelling is. Maybe if a bunch of people tell him he is an idiot he will just accept it and crawl into a hole, never to disgrace the banshee again.

When I finially find out what I am going to do with this project I will let you know. I am leaning more towards the banshee engine so I could probably let you have it. I am also thinking about the Stroker kits that are out for the 450 engine right now. If I don't decide to do that I could probably make you a deal on the blown 450 engine. You should know that it would already be in pieces more than likely. You wouldn't be getting a complete engine all together. It's already been tore down to see what happened to it.

I was actually going to contact you about this project. You seem to have the most experience with this sort of thing around here. Have you ever considered doing an outside project for someone? One of the big problems I was thinking about would be the pipes hitting the radiator. I would prefer some kind of in-frame pipes as opposed to out of frame drag pipes. Not sure how the routing would go. Fabricating engine mounts won't be too hard. I really want to put a banshee motor in there instead of a new 450. I like the two-stroke hit. I am thinking about a 4mil stroker. I do a lot of trail-type riding and go to the walden dunes a lot. I don't really do too much drag racing. Lots of hills and straights though. All of our property on our ranch is pretty much wide open stuff. Let me know what kinda ideas you have or any issues you've thought of on this sorta thing. I can get an older banshee (mid 90's) for pretty cheap. Plus it would give me a second frame I could stick the streetbike engines in. Thanks!

I have a YFZ frame that we want to stick a banshee engine in. Some dumb fuck took my yfz out without my permission whe i went into town to meet someone and blew the engine all to hell. Unless I can find a new YFZ engine to put in it I want to put a banshee engine in the frame. The engine is totally fucked. The oil plug came out of it and he rode it with no oil and ruined pretty much the entire engine. The bike was already on its way to a rebuild so I'm not really all that upset about it. I am looking for a new 450 engine to put in it or a good strong banshee engine to put in the frame. If anyone has either of those, pm me please. I have two streetbike motors, but don't want to make this one a drag or hill-shooter bike. I might also consider selling the rolling chasis with everything but the engine. I would give you the blown one if you wanted it with it. So if you are interested in a yfz rolling chassis or have a banshee/450 engine let me know.

I saw your response here and just started to laugh my ass off. Free Bump