Jump to content

sheefreak

Members
 View Profile  See their activity

  • Posts

    2,914

  • Joined

  • Last visited

 Content Type 

Everything posted by sheefreak

  1. sheefreak
    Get a hold of Holyman, I'm sure he has one.
  2. sheefreak
    May I ask why .80 over? I have a set w/stock bore I might be able to part w/.
  3. sheefreak
    I have recently purchased several items on two different occasions from Mark and products have been as described or better. On both occassions recived the items within 3 days of payment. Hats off too ya Chapmanmd!
  4. sheefreak
  5. sheefreak
    Any packing will work. If you get the fmf, just use what you need, if it is a sheet style packing, just cut it to length and width.
  6. sheefreak

    arm pump

    sheefreak replied to compose2's topic in MX Forum

    A stabilizer is a big help!
  7. sheefreak
    Bobby, I love your rig dude.
  8. sheefreak
    You definately need to jet up, but it would've at least fired w/ether if you had any spark. Keep looking electrical.
  9. sheefreak
    You are way rich on the pilot ckt for sure. You should have to use the choke, it prolly runs best right when you start it up before it warms up. You may also need to lean out your needle one position also. Then see how you are doing.
  10. sheefreak
    Need pics!
  11. sheefreak
    He's a fair as anyone else.
  12. sheefreak
    Only makes a difference starting. Even if they were on the wring side, it would run fine once it warmed up.
  13. sheefreak
    Definatley sounds like a rich condition. Can you start it w/o the choke on fairly easily.
  14. sheefreak
    Mainly sand. I was wanting to go +4, but I am not sure that will be enough.
  15. sheefreak
    Building 4 Mil Cub motor and don't know what length swingarm to go with. Would like it to be as short as possible without spending all my time on my back.
  16. sheefreak
    Boonman also does them. I know he doesn't like PM's, but I don't know his email.
  17. sheefreak
    Happy b-day.
  18. sheefreak
    Have another PM.
  19. sheefreak
    I second the t-5's.
  20. sheefreak
    Have PM.
  21. sheefreak
    Braxton, you're on crack.
  22. sheefreak
    Mods?
  23. sheefreak
    Mine doesn't creep a bit. Is your adjustment correct on the bottom. Your clutch pushrod is prolly not adjusted correctly. Make sure the pointer that your throttle cable is connected to is lined up w/pointer on crankcase. Should be good to go from there unless you have too many fibers, or your pointer is bent.
  24. sheefreak
    Glad to hear you are up and running again!
  25. sheefreak
    Do you have a picture handy of the chromoly swingarm, my administrator has restricted access to e-bay.

BHQ Quick Links

×
×
  • Create New...