Onesickcrewcab

I had this happen to my bike. Turned out to be both floats were sticking. I guess I didnt purge it well enough cause the float needles were stuck in the carbs. I can look at my powerjet line and see that there is was no fuel filling the bowls because the line level didnt increase. Could be not getting any fuel. Advice would be to get some pipe plugs when your not riding it. It helps out.

Chat report. So far the Chat seems to be working really well. The lag is gone. Only problem that seems to happen. When someone posts links ocasionally it underlines all text in the chat. Have to log out and back in.

Came out of 2006 silverado. So same dash.

The lights will just blow without the regulator. Seen it happen quite a few times.

thanks for the much needed upgrades Lee!!

Not this again! lol

Last bump!

Wicked A Arms are nice quality arms. Been running them on my 450 for a few months with no issues.

Wheres the dash cam videos? lol

Nice meet you Chase, Manny, and Wes. Tim, JB, Paul, Pablo. Good seeing you guys again. We will have to figure out when the next trip will be and where. Chase glad you got the bugs worked out of that bike!

As long as I'm not out of town for work. I will be there. Everyone planning on camping, go to reserveamerica.com and get your reservations. Even know there may be some spots left, there will be no drive up camping passes. Thats how they roll at pismo during the summer. The spot your looking for is oceano dunes svra.

No thanks. lol.

Let's do this! Anxious and pretty much ready to go!

Bump

Just make sure you wear some thick pants when that motor decides to remove itself in pieces. LOL. Just messing with ya man. Hope it runs good.

I dunno.. RagunCajun is giving Dinner a run for his money! lol

First time my banshee went upside down this happened. Didn't really notice it until i tried to take the gas tank out. I used a long bar to bend mine back, but I took it all apart for PC. Good luck fixing it. Its not the difficult and make sure there are no major cracks. Mine wasn't bent that bad. I haven't worked on a banshee yet that has had a straight steering stem hoop.

I'm going to head out friday morning with Austin, and Paul will be following if he's not working.

I've never bought anything from Mark, but he seems like a good guy. If he's not I will see him at pismo sometime in the near future!

Paul you going to make it out?

So this is what we need to complete this motor build. 1. Stator 2. Flywheel, woodruf key and nut 3. Clutch 4. Clutch Pressure Plate, springs and bolts 5. Tranny shifter shaft 6. Eccentric Bolt, Nut and retainer 7. 8 Head Nutz 8. 8 Case Nutz (The ones that hold the cases together underneath the crank) 9. All the top bolts to the top of the case that hold the cases together 10. Clutch cable holder and bolt (The black holder on top of the case) 11. Waterneck that goes into the side of the case (along with o ring and retainer clip) 12. Case seal kit 13. The 3 retaining clips for the tranny bearings and crank bearing (I may have these already) 14. Base Gasket 15. Clutch adjuster and ball 16. Cool head studs and o ring kit 17. Clutch Cover gasket 18. 3 Stator plate bolts 19. kicker gear I will update this as I find parts and receive parts, or add anything I may have forgotten.

No, but I can get a good deal on a harness if thats what you need. Just need to know the year of your truck and if it has onstar, do you want to keep it if it does? Does it have bose? If so does it have have the factory subwoofer? Do you want to use an aftermarket amp for all your speakers? Do you want to keep the factory door chime? So many options with Chevy. Not to mention the harness for the chevys are normally pretty pricey.

I've never been there so I'm not sure where we will be camping yet. My truck will probably be easiest to find. Bright orange chevy crew cab. Will have a 23 foot Attitude Toy hauler somewhere around it.

Thanks JD. 540 shipped with paypal fees waived!

http://myworld.ebay.com/ebaymotors/wicked350/