Jump to content

kawa110

Members
  • Content Count

    3,262
  • Joined

  • Last visited

  • Days Won

    31

Everything posted by kawa110

  1. kawa110

    Will Trade

    Sent from my iPhone using Tapatalk
  2. kawa110

    Will Trade

    Thought for sure u were gunna post a goat pic!!!! Sent from my iPhone using Tapatalk
  3. kawa110

    BansheeHQ Official Live Thread!

    Sent from my iPhone using Tapatalk
  4. kawa110

    Buying Used Exhaust Pipes

    Anything can happen Sent from my iPhone using Tapatalk
  5. kawa110

    Buying Used Exhaust Pipes

    Generally not a problem, unless they damaged and you need to fix them, Shavings in the expansion chambers? How big are the shavings , Could have come from a motor that was blown. Sent from my iPhone using Tapatalk
  6. kawa110

    BansheeHQ Official Live Thread!

    Time of year it’s 50 at night and 100+ in the day Sent from my iPhone using Tapatalk
  7. kawa110

    BansheeHQ Official Live Thread!

    Any one with rule clues? The BFH didn’t work for my airbag either... Sent from my iPhone using Tapatalk
  8. kawa110

    whats a good 1/8 mile time ?

    Tapatalk app makes it easier Sent from my iPhone using Tapatalk
  9. kawa110

    BansheeHQ Official Live Thread!

    Threaded in, pressed in? Special tool? I assume it keeps the fluid from splashing out of the lowest part of resi if it runs low to prevent air from being trapped? Is it necessary? Sent from my iPhone using Tapatalk
  10. kawa110

    BansheeHQ Official Live Thread!

    How does this come out? Front master cylinder Sent from my iPhone using Tapatalk
  11. I have a frame Located 92256 Bill of sale Sent from my iPhone using Tapatalk
  12. Wher u located? Sent from my iPhone using Tapatalk
  13. kawa110

    Float Pivot Pin Removal

    Spring loaded center punch works well on “stuck” pins. Most carbs the pin is designed to go in and out only one direction. If I remember correctly the banshee stock carbs the pin should slide out very easily. Sent from my iPhone using Tapatalk
  14. kawa110

    BansheeHQ Official Live Thread!

    Sent from my iPhone using Tapatalk
  15. kawa110

    BansheeHQ Official Live Thread!

    I’ll try the chorizo one next Sent from my iPhone using Tapatalk
  16. Bel ray good Sent from my iPhone using Tapatalk
  17. kawa110

    banshee cases

    I got cylinders 50$ shipped? Sent from my iPhone using Tapatalk
  18. kawa110

    BansheeHQ Official Live Thread!

    I knew you had skeeters conact. Sent from my iPhone using Tapatalk
  19. kawa110

    BansheeHQ Official Live Thread!

    Get lots of pictures Sent from my iPhone using Tapatalk
  20. kawa110

    BansheeHQ Official Live Thread!

    Purdy Sent from my iPhone using Tapatalk
  21. kawa110

    clutch fiber thickness?

    I’ve used full synthetic with zero issues. Needs to be for wet clutch. Sent from my iPhone using Tapatalk
  22. kawa110

    THE RANDOM PICTURE POST.

    A lot of shoes but only one one bare foot. Sent from my iPhone using Tapatalk
  23. kawa110

    Spark plugs keep coming loose

    You need to verify the compression. If it is that high u need different domes. +10 is too much unless you got a lot of clues,correct fuel, correct squish, correct jetting/tune. What brand compression tester What’s ur elevation Remove stator cover and look at the plate the stator is bolted to. You’ll see if it is adjustable. The stock plate is cast metal. A aftermarket plate is generally billet aluminum and Wher the case halves meet will have a mark with numbers for adjustment. Sent from my iPhone using Tapatalk
  24. kawa110

    Live Work and Discussion Thread

    More pics of you breaking stuff... Sent from my iPhone using Tapatalk
  25. kawa110

    BansheeHQ Official Live Thread!

    One good slag burn with flux in it..... Gloves, shirt, weld cap minimum Sent from my iPhone using Tapatalk
×