msprouse Posted April 19, 2006 Report Posted April 19, 2006 Anyone know a good place to get cylinder work in utah Quote
odaen Posted April 19, 2006 Report Posted April 19, 2006 Ohton's Racing K&T D&M LC Performance I think some of those are around that area. Go click the banners on Planet Sand, seems like there was a good handful of builders from there. Quote
locogato11283 Posted April 19, 2006 Report Posted April 19, 2006 u can send your cylinders out also. theres a ton of good builders just a drop shipment away...i really like FAST and redline... Quote
it's stolen Posted April 19, 2006 Report Posted April 19, 2006 what kind of work do you need done? Quote
hittintrees srh Posted April 19, 2006 Report Posted April 19, 2006 K&T made my shee rip!!!!!!!!!! Linsey is another good one Quote
msprouse Posted April 19, 2006 Author Report Posted April 19, 2006 I just want to go 64.5mm 10 over stock Quote
sand rocket Posted April 19, 2006 Report Posted April 19, 2006 I would take them over to Lynn at LCperformance in salem. Quote
BKOLFO4 Posted April 19, 2006 Report Posted April 19, 2006 Not trying to be a smart a$$, but just in case you measured and need 64.5, 64.5 is .020 over stock, not .010. I would hate for you to order the wrong piston kit if you need 64.5. . . Brian Quote
msprouse Posted April 19, 2006 Author Report Posted April 19, 2006 I have not measured I'm glad you told med that I just want the next size over stock to extend the life of my cylinders ass much as possible thanks man... Quote
BKOLFO4 Posted April 20, 2006 Report Posted April 20, 2006 My cylinder measured 64.156 at the worst point, but no one would touch it without going .020. Oh well, that is still 4-5 bore jobs (assuming no major problems), and you can resleeve after that. Brian Quote
rsheppick Posted April 20, 2006 Report Posted April 20, 2006 K&T made my shee rip!!!!!!!!!! Linsey is another good one 504461[/snapback] Do not let Linsey port anything. Quote
rsheppick Posted April 20, 2006 Report Posted April 20, 2006 I would have someone that is known for porting. If local, K&T would be my first choice. Quote
msprouse Posted April 20, 2006 Author Report Posted April 20, 2006 Do you know if a guy named muchmore works with K&T? there are some guys here in T-Town that know him pretty well. Quote
md7571 Posted April 20, 2006 Report Posted April 20, 2006 Kim Muncmore is the K in K&T. They do good work and are reasonable and have good turnaround times. Quote
msprouse Posted April 20, 2006 Author Report Posted April 20, 2006 Thanks guys for all the info. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.