G Force Axles

[Capone]

Can I get a review on the G Force axle? I'm looking to get one so anyone who has one please chime in.. thanks.

[txblueshee]

eh.. what kind of riding ? You can get a used lsr or rpm off flea bay for the same price as one of those new...

 

 

Mike

[Capone]

RMATV is selling GForce's for 199.99, I haven't seen a lonestar that cheap

Its going to be mainly drag/dune/light riding.

Edited April 2, 2006 by Shee K

[floyd398]

my brother got one a while ago for his Blaster to go along with a +4inch swingarm. it's the identical axle for the banshee. looks really nice, we do alot of rough trail riding, lots of hard whoops and some minor jumping. seems to be a nice product

[locogato11283]

i think they have a good warranty on them so might be worth checkin out especially for light riding, duning and dragging....

[korndawg]

I've got one of the G-force axles, and so far I'm very pleased. It looks great, and seems to be built pretty well. Installation on it was very easy. Great design on the axle nut. For $200 I think it's a helluva deal.

[PUSH THE THROTTLE]

I run one and like it a lot. I've tried to break it but no luck. I'd definately get one again if I had a second shee.

[jaysea1]

As previously stated, RMATV has a warranty on these axles. I bought one, and ride in the dunes all the time. Fit and finish is good, install was easy(directions are ok)...this axle is also for the raptor and blaster, so there is an extra spacer that you will not use.It comes with 4 little spacers, that go on the ends( 1 or 2 per side, depending on the desired width) And then There are two large spacers hollowed out on one side(to house the cir clips)...only use the one on the brake hub side, the axle nut houses the c clip on the sprocket side. So far so good, I don't get 20 feet of air, so I don't know the limits of this axle, but for hard duning and draggin up the hill it works great.200$

[Wicked98Shee]

i got one bout a year ago from a buddy on a trade, he was worried about strength LOL. so it went in my wifes shee, and so far she has cost me a swingarm and carrier from clippin a tree with the back tire and the axle is still true as hell. its identical to the durablue eliminator axle. peel the stickers and other than the axle nut ya cant tellem apart. its a decent axle, especially after all the crap she was sliding into when she 1st got her shee. i would definatley go with another one just because of what i seen her do to hers when she hit the tree LOL

[GregVanliew]

alot of people over a z400central run these and they say there a good product,

but if the chrome gets messed up they wont fix but if it bends then they will replace but you have to pay shipping i think

[1000dollabill]

i run one, but mostly dune. great axle for the loot.

 

bill

[bansheecaptain]

I run one and i've put it through hell and it's still looking like it came out of the box .. i would buy another ,very good price for what you get

[Bansheeman1121]

I was gonna buy one but at the last minute I went with a durablue, the g force looked to much like stock, i mean not that the thickness is everything but the durablue just looked more sturdy.

[korndawg]

was gonna buy one but at the last minute I went with a durablue, the g force looked to much like stock, i mean not that the thickness is everything but the durablue just looked more sturdy.

 

I'm running the G-Force, and a couple of my buddies are running durablue. The only difference we could tell between the two was the axle nut, and the sticker that they put on the axle.

[Wicked98Shee]

I'm running the G-Force, and a couple of my buddies are running durablue.  The only difference we could tell between the two was the axle nut, and the sticker that they put on the axle.

499923[/snapback]

 

thats is all the difference i could find too. mebe a caliper ya could get a difference but 200 bucks for what you're getting, it's a great deal! make sure to use threadlok on the allen bolt that locks the nut in place!

Edited April 12, 2006 by Wicked98Shee