Keithrc1988 Posted January 18, 2021 Report Posted January 18, 2021 Just bought a banshee mostly stock except gold series exhaust and TORS delete, starts, idles, and revs good but bogs on low end when you take off and starts running great about top of 4th. Came with an extra set of carbs which I have swapped and it seems to be a little better but still bogging any help would be appreciated for I have always wanted a banshee and finally got one just tryna get it tuned right. Quote
375hp banshees Posted January 18, 2021 Report Posted January 18, 2021 What jets , filter, elevation Define bogs, falls on it's face, blubbers/ spits n spudders... Quote
Keithrc1988 Posted January 18, 2021 Author Report Posted January 18, 2021 Not sure on jet size, not much experience with carbs, and I’m running k and n open filter straight off the carburetors. I’m at 750ft of elevation and when I say bogs I mean it falls on it’s face, until around top of 4th then runs good. Quote
375hp banshees Posted January 18, 2021 Report Posted January 18, 2021 pop the bowls of the ones you took off & see . Are the other carbs complete or you kept same slides/ needles? Make sure filters aren't over oiled & Delete one of your threads , its gonna get confusing Quote
gusto Posted January 18, 2021 Report Posted January 18, 2021 Not FMF Fattys? We need to know your jet sizes, both pilot and main Quote
ATV_hub Posted January 18, 2021 Report Posted January 18, 2021 (edited) I’m no help with jetting stockers but, are the bowls on the right carbs? are the slides the right way around? Is the choke balance tube on right? Edited January 18, 2021 by ATV_hub Quote
Keithrc1988 Posted January 18, 2021 Author Report Posted January 18, 2021 The numbers on pilot jet are 27.5 and main jet 300 Quote
Keithrc1988 Posted January 18, 2021 Author Report Posted January 18, 2021 And yes fmf gold series fattys Quote
375hp banshees Posted January 18, 2021 Report Posted January 18, 2021 Hmm clip must be all the way down in the bottom groove?Where are your air screws @Sent from my SM-A505U using Tapatalk Quote
Keithrc1988 Posted January 18, 2021 Author Report Posted January 18, 2021 (edited) Not sure on placement of clip, and air screws are out 2 turns Edited January 18, 2021 by Keithrc1988 Quote
Keithrc1988 Posted January 26, 2021 Author Report Posted January 26, 2021 Ok figured out problem, took off air filters and shee ran perfect, not a bit of bogging and twice the power it had. I ordered new filters they will be here tomorrow. 1 Quote
locogato11283 Posted January 27, 2021 Report Posted January 27, 2021 On 1/25/2021 at 7:38 PM, Keithrc1988 said: Ok figured out problem, took off air filters and shee ran perfect, not a bit of bogging and twice the power it had. I ordered new filters they will be here tomorrow. That may not necessarily be the problem.. Let us know how it runs with the new filters. Quote
Keithrc1988 Posted January 28, 2021 Author Report Posted January 28, 2021 New filters on and it runs great, can’t believe it was that simple of a fix the whole time Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.