my head hurts from trying to figure out wich crank to use....

[johnzboy]

Kevin has my cylinders now. He is doing a 4 mil port on a set of dune ported cylinders. I was going to go with his crank, but I have been readin mixed reviews. Some are happy some say hot rods.... I don't know. Kevin's, hot rods, hot rods extra weld, different bearing...... Any help would be apeciated!

[do-work-son]

When HJR did my motor is was an extra $125 for a hotrods and extra weld worth the piece of mind to me when you see all these no name cranks destroying motors.. Not bashing Kevin's cranks at all just I've never had one, ran one, or ever know any one that has

[lms1977]

I would do a hot rods if it were me

[possum]

please just do hotrods and maxloads. Then go take a nap.

[mopar1rules]

i'd go with the vitos 4 mill long rod crank

[milto29]

Hot Rod with there Bearings and you'll be set . 

[oldskool]

I'll say Vito's also, their rods are pretty

[Infamous039]

I say vitos thats all I have used as far as 4mill cranks never blown one

 

Sent from my SPH-L720 using Tapatalk 4

 

 

[trickedcarbine]

Loco just posted a motor that puked its wang crank guts out the bottom of the cases. They make nice confetti. But if it were me I'd go with either a Hot Rods or new style Vito's. either way get some max loads and a weld on the thing and never worry.

[toytech]

hot rods or vitos

[johnzboy]

Thanks guys!

[mike0chek]

hot rods!

[special06shee]

It luck of the draw. They are all junk. Anything thats spins that fast is prone to failure.

[jbooker82]

I would go with a Hot Rods. You can get them from FAST for $435 or $450 with extra weld.

http://www.farmandsandtoys.com/partdetail.asp?partid=78