johnzboy

I'm getting the pipe set not the kit. I've have 35 pwk and pods Sent from my SGH-M919 using Tapatalk

I am ordering t5 pipe set from rockymountain. What else do I need to install these? I know front hangers but what else? Oring, spings, pipe seals, rear mount? Thanks Sent from my SGH-M919 using Tapatalk

Bump for a great seller! Carbs look great, kept me informed on shipping! Thanks! Sent from my SGH-M919 using Tapatalk

For those of you who had questions about this. This is a nice product from Cascade! I ended up cutting a 3" hole in the clutch cover. This will only let you access adjustment on the pancake bearing. here is what it all looks like!

Its on cascades website. Its under cascade banshee parts. It called a clutch covet insert. It allows you to adjust pancake bearing and thats it. Just have to cut your stock cover. They said they were discontinuing them soon.... Sent from my SGH-M919 using Tapatalk

Just ordered there insert with the orings. I called them and asked how big of hole can I cut in the clutch cover for adjustments. They did not know...... can someone tell me. I can go ahead and cut the hole and finish the motor this weekend and install in the frame. Thanks Sent from my SGH-M919 using Tapatalk

thanks guys! it was a good feeling about the 3 min mark!

My first Banshee build! Passed the leak down test! 6 psi for almost an hour now. so close to going back in the frame. I cant wait! 4mil vito's crank, .020 over HJR dune port.

Great seller! Great price on the stator cover! Stayed in contact about the shipping! Thanks! Sent from my SGH-M919 using Tapatalk

Bump for great seller! Stayed in contact with me on shipping! Thanks! Sent from my SGH-M919 using Tapatalk

Ill snap some pics in the morning Sent from my SGH-M919 using Tapatalk

I have a stock set still atached to spindles. Make me an offer Sent from my SGH-M919 using Tapatalk

Souththirty. Sent you a txt. No reply

Looking for an aluminum stator cover. Shipped to 27406. Thanks

my project is starting to come together! Kevin has my cylinders, cant wait to get them back! Here is what im going with: 4 mil long rod Herr dune port 28 pwk carbs (open to sugestions) pump gas ( what ever domes kevin tells me to buy) chariot reeds Im 165 lbs with no gear on (evey builder i contacted asked me this) I will be using this from 700 to 2000 feet above sea level Anything from messing on a mx track, fast trails, and some tight sections in the mountains. What exhaust would best suit my motor and me. Ill ask kevin also, but also like to here what everyones opinion is. thanks guys.