**BansheeHQ Cylinder Poll**

[locogato11283]

With all of the new cylinders out there, I am curious as to what is getting the most attention or interest these days. Now that everyone has seen Serval dyno numbers as well as what the stock cylinder motors are capable of what are you most interested in?

 

Please answer all three questions. Thanks!

[Josh Z]

I had a 10 cub and now a 4dm.... Kinda miss riding all over and not caring what damage is being done!!! my next build will be a ported 350 or 4 mil stock cyl. simple and cheap to rebuild....

[vulvafan537240]

i am currently starting a 4 mill cub build coming from a 4 mill stock cylinder. wouldve went with a 10 mill but i already had the 4 mill crank.

[BigRed350x]

Why no twister on the poll? I would do Twister cylinders over CP industries cylinders any day. If I had to stick with CP industries I would do a 10mil DM.

 

- Jared

[locogato11283]

Why no twister on the poll? I would do Twister cylinders over CP industries cylinders any day. If I had to stick with CP industries I would do a 10mil DM.

 

- Jared

Fucking figures you'd see this and throw Twister in there. Honestly, it didn't even cross my mind. I am really aiming at more of the stock vs. Cub or Serval stuff.. I just threw the DM on there because I know there are several on the site.

[Phelps]

10mil cub now

 

want to build a dmx (just sounds badass)

[Dicklez]

Building a 10mm cub now. Coming from a pretty much stock setup besides all the bolt on shit. Only thing that scares me is the nikacil. I ride with Lms1977 who has the 10mm serval and it fuckin rips. Im curious to see how it compares to the cub.

[BigRed350x]

Fucking figures you'd see this and throw Twister in there. Honestly, it didn't even cross my mind. I am really aiming at more of the stock vs. Cub or Serval stuff.. I just threw the DM on there because I know there are several on the site.

 

hahahaha!

 

You should have put "twister cylinder for jared" in the poll

 

You knew I'd say Twister.

- Jared

[dirtydownunder]

had stock, and ported stock. now 4mm serval and will end up porting it for more top end.

 

i dune and trail tho.

[06specialedition]

Running ported stock cylinders right now. If and when I upgrade I'll probably do a ported stock cylinder 4mm.

[ham354]

Running a 4mil stock cyl but upgrading soon to a cub, but I wouldn't mind building a stock stroke, stock cyl motor like cam did at redline

[springer]

what about a cheetah, lol. more fun than a serval and faster than a cub all at the same time.

 

j/k, im sure nobody will agree, but i had to say it since it wasn't in the options to vote.

[lms1977]

I have a 10mil serval and if had to do it all over I would do the same motor just some porting to it. now if pickezs cub runs good with good bottom end well I might want a cub then time will tell.

 

as for now I am very pleased with my setup other than I will always want more my wallet keeps telling me ifs fast enough but my thumb just wants more

[guns4children]

I have a 4 mill serval and i think it runs like a champ. i do 75% trails and 25% Coal hills. If i had a coal only bike it woud be a 10mil DM.

[pweezy42]

i ride basically what guns rides since we are from the same area, and the reason i went serval is because of what everyone says about the bottom end. our trails here are pretty rocky at some points so we are not always WOT.