cearven1987 Posted December 13, 2008 Report Posted December 13, 2008 so i started taking apart my clutch and i couldnt get the ball out i finally got it out and the ball looked like it had started to weld itself to the rod and now i cant get the rod out the weird thing is that there has only been about 20 min on it since i replaced the ball Quote
travis6767 Posted December 13, 2008 Report Posted December 13, 2008 time to buy a pancake bearing from fast Quote
cearven1987 Posted December 13, 2008 Author Report Posted December 13, 2008 yea i plan on getin one but the problem im having rite now is that i cant get the rod out any tips Quote
jbooker82 Posted December 13, 2008 Report Posted December 13, 2008 take the clutch actuator out and see if the end of the rod is mushroomed. You will have to take a dremal and grind the mushroom off or split the cases. josh Quote
cearven1987 Posted December 13, 2008 Author Report Posted December 13, 2008 i took the actuator out but i cant really tell if the rod is mushroomed but the actuator itself is burnt and has burs all over it and it only has prolly 30 min of ride time on it Quote
jbooker82 Posted December 13, 2008 Report Posted December 13, 2008 I would emagine that the end of the rod is mushroomed. The best way to fix it is to split the cases. Might as well have your crank trued and welded, anda modded shift star while you are in there Quote
cearven1987 Posted December 14, 2008 Author Report Posted December 14, 2008 i was hoping i wouldnt have to do that im really not experienced doin stuff like that ive herd good stuff about passions wonder how much he would charge to do all of that how hard is it to do im ok with mechanical stuff but ive never been that deep into one Quote
shee4speed Posted December 14, 2008 Report Posted December 14, 2008 (edited) damn,so if I'm reading this right.If your ball gets welded to the rod you have to split the case to repair it? Edited December 14, 2008 by shee4speed Quote
vulvafan537240 Posted December 14, 2008 Report Posted December 14, 2008 damn,so if I'm reading this right.If your ball gets welded to the rod you have to split the case to repair it? this all sounds very painful! :biggrin: Quote
cearven1987 Posted December 18, 2008 Author Report Posted December 18, 2008 lol yes its not very fun at all i cant really tell if the rod is mushroomed so im gonna replace the actioator and the ball and try it again if that dont work ill have to wait till i get the money to have someone fix it Quote
98_shee Posted December 18, 2008 Report Posted December 18, 2008 lol yes its not very fun at all i cant really tell if the rod is mushroomed so im gonna replace the actioator and the ball and try it again if that dont work ill have to wait till i get the money to have someone fix it Get a clymers manual and it will walk you through it. Where are you from? Quote
BigRed350x Posted December 18, 2008 Report Posted December 18, 2008 Hit up www.cascadeinnovations.net and order a pancake bearing. Pretty sure M&M ATV (site sponsor) carries them or could get you one as well. - Jared Quote
cearven1987 Posted December 20, 2008 Author Report Posted December 20, 2008 i live near tulsa oklahoma ill prolly endup takeing it to someone who knows what there doin ive had this thing apart a bunch and never seem to get it rite Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.